The USB to RS485 is a fully automatic plug-and-play USB module that connects to your PC via the Universal Serial Bus (USB) port and provides robust bidirectional USB to RS-485 protocol conversion with automatic RS-485 flow control.Bi-directional USB to RS485 converter module can be used by MODBUS RTU Testing and Debugging software to communicate with the MODBUS RTU Network and collect data from a variety of Modbus slaves, energy meters, sensors, industrial PLCs, and VFDs for debugging, verification testing, and real-time status monitoring.
Features:
- Self-powered from USB.
- USB-RS485 converter provides a USB to RS485 serial interface with USB A / USB B connectors.
- EIA/TIA-485 communication interface with low power requirements.
- Output shorting is prevented by a thermal shutdown circuit.
- Supports 32 slaves on RS485 Bus.
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
- Fully integrated USB termination resistors.
- Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
- Data transfer rates from 300 baud to 5 Mbaud (RS485) at TTL levels.
- FIFO receives and transmits buffers for high data throughput.
- Device supplied pre-programmed with unique USB serial number.
- Integrated power-on-reset circuit.
APPLICATIONS
- USB to serial RS485 level converter.
- USB to RS485 industrial legacy device PLC / HMI / SCADA communication.
- USB Instrumentation PC interface
- Upgrading legacy peripherals to USB
- USB password protected file transfers.
- USB to RS485 Data Logging application
- USB to RS 485 industrial / instrumentation device Diagnostic application
- Transceivers for EMI-Sensitive Applications
- Industrial-Control Local Area Networks
- DTE/DCE interface Application
- DMX512 Lighting Control Application.
For more info contact us on 8088423347 or visit www.researchdesignlab.com
No comments:
Post a Comment