Energy Management System - EMS

The majority of manufacturers want to install Energy Management Systems in their factories to reduce energy consumption , predict failures and  identify root cause abnormalities. EMS Platform allows users to monitor energy consumption information, accurately evaluate energy costs, and optimize energy efficiency by 8-10%. 

EMS Modules

• Energy Consumption overview dashboard 
• Load by Machine & Circuit 
• Report showing loads, leakage, energy & power factor .
• Potential circuit or machine failure
• Condition detection - under loaded, overloaded, down
• Peak hours/demand
• Alert on anomalies  
• Generator run hours & Fuel Consumption 
• Advanced power Analytics for root cause  analysis  
• Meter Status 
• Demand vs Actual consumption 
• Machine Utilization and Energy Efficiency

EMS - CLOUD PLATFORM

Ingest and process data from multiple Meters to deliver actionable intelligent reports &  alerts. System sends alerts  as an email or SMS notification.

For more info contact us on 8088423347 or visit www.rdltech.in

USB To RS485 Converter Module

 The USB to RS485 is a fully automatic plug-and-play USB module that connects to your PC via the Universal Serial Bus (USB) port and provides robust bidirectional USB to RS-485 protocol conversion with automatic RS-485 flow control.Bi-directional USB to RS485 converter module can be used by MODBUS RTU Testing and Debugging software to communicate with the MODBUS RTU Network and collect data from a variety of Modbus slaves, energy meters, sensors, industrial PLCs, and VFDs for debugging, verification testing, and real-time status monitoring.

Features:

• Self-powered from USB.
• USB-RS485 converter provides a USB to RS485 serial interface with USB A / USB B connectors.
• EIA/TIA-485 communication interface with low power requirements.
• Output shorting is prevented by a thermal shutdown circuit.
• Supports 32 slaves on RS485 Bus.
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
• Fully integrated USB termination resistors.
• Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
• Data transfer rates from 300 baud to 5 Mbaud (RS485) at TTL levels.
• FIFO receives and transmits buffers for high data throughput.
• Device supplied pre-programmed with unique USB serial number.
• Integrated power-on-reset circuit.

APPLICATIONS

• USB to serial RS485 level converter.
• USB to RS485 industrial legacy device PLC / HMI / SCADA communication.
• USB Instrumentation PC interface
• Upgrading legacy peripherals to USB
• USB password protected file transfers.
• USB to RS485 Data Logging application
• USB to RS 485 industrial / instrumentation device Diagnostic application
• Transceivers for EMI-Sensitive Applications
• Industrial-Control Local Area Networks
• DTE/DCE interface Application
• DMX512 Lighting Control Application.

For more info contact us on 8088423347 or visit www.researchdesignlab.com

LiFi Visible Light Communication

Li-Fi is a plug-and-play evaluation board for developing a wide array of visible light communication applications in consumer, wearable, industrial, medical and Internet of Things (IoT). Li-Fi transfers data from one source to another through visible light without the flickering effect. Technically, 1‟s (LED on) and 0‟s (LED off) are modulated and then transmitted at a very high speed.

Features:

• Supports baud rates up to 38400
• Support serial (UART) communication
• Supported distance from the ceiling 6 to 15 feet max
• Plug-and-Play with simple configuration
• Ceiling / wall mounting LED light can be used for the communication

Applications:

• Indoor wireless open optical communication.
• Indoor navigation.
• Under water visible light communication.
• Smart indoor blind assistive application.
• Vehicle to vehicle communication.
• Monitor as transmitter for Data Communication.
• Preventing Phishing Attacks using One Time Password and User Machine Identification.
• Super market navigation system and discount information based on location.
• Smart LIFI based Car Parking system.
• Smart Location Aware of Services.
• Visible light positioning for asset tracking.
• POSITIONING TECHNIQUES FOR ACCURATE LOCALIZATION mobile robot navigation.
• Integrated, underwater optical /acoustic communications system.
• Visible Light Communication Based Traffic Information Broadcasting Systems.

For more info contact us on 8088423347 or visit www.researchdesignlab.com

ATmega328 Development Board- Trainer Kit

 ATMGEA328 IoT Trainer Kit essential development features a plug and plays design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program/application development. ATMGEA328 IoT Trainer Kit equipped with onboard IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many educational institutions and R&D LAB across the world.

Board Features

• Plug & Play Interface Connectivity.
• Professional EMI/RFI Complaint PCB Layout Design
• Modular Block design makes Easy access & quick prototyping
• FRC connectivity features minimize the connection Error.
• High-Quality Grade PCB with wooden Enclosure.
• RS232, RS485, USB communication port.
• On Board WiFi / Bluetooth Connectivity
• 8 interfacing LED's
• 1*4 Menu Keypad
• 4*4 Matrix Keypad
• 7 Segment Multiplexed Display
• 16*2 LCD & OLED Display
• ADC & DAC Card
• 23 general purpose I/O lines
• The DIP40 locking device for reuse of ATMEGA microcontroller.
• Supports ATMEGA 16,32,64 chips 40 pin DIP package.
• DC Motor/ Stepper Motor Driver.
• Power Supply 3.3V and 5V SD CARD Interface.
• RTC & EEPROM Interface.
• Relay, Buzzer.
• 1xTemperature Sensor.
• 3x Analog Test POT.
• 3.3 to 5V Level Converter

Scope of Learning Experiments:

• LED blinking.
• 8 bit LED Left shift, Right shift and counting operation.
• Keypad  Interrupt Interface
• 16*2 LCD interface.
• Matrix Keypad Interface.
• ADC& DAC interface.
• Traffic Light Signal Interface.
• 8 bit DIP switch interface.
• 7 Segment interface.
• L298 Driver for DC Motor and Stepper motor interface.
• Elevator Interface.
• Buzzer, Relay interface.
• RS485, RS232 serial communication
•  PWM Interface
• UART Operation
•  RTC DS1307I2C protocol interface.
• AT24C04 EEPROM I2C protocol interface.
• RF/WiFi Communication.
•  SPI protocol interface
• Temperature Sensor Interface.

For more info contact us on 8088423347  or visit us on www.researchdesignlab.com