Overview:
The STM32F405xx and STM32F407xx
family is based on the high-performance ARM® Cortex ®-M4 32-bit RISC core
operating at a frequency of up to 168 MHz. The Cortex-M4 core features a
Floating point unit (FPU) single precision which supports all ARM
single-precision data-processing instructions and data types. It also
implements a full set of DSP instructions and a memory protection unit (MPU)
which enhances application security.
Features:
- Core: ARM® 32-bit Cortex ® -M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
- Memories.
- Up to 1 Mbyte of Flash memory.
- Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM.
- Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories.
- 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode.
- 2×12-bit D/A converters.
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support.
- Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input.
- Up to 140 I/O ports with interrupt capability.
1.
Up to 136 fast I/Os up
to 84 MHz.
2.
Up to 138 5 V-tolerant
I/Os.
- Debug mode
1.
Serial wire debug (SWD)
& JTAG interfaces
2.
Cortex-M4 Embedded Trace
Macrocell™.
- Up to 15 communication interfaces.
1.
Up to 3 × I2C interfaces
(SMBus/PMBus).
2.
Up to 4 USARTs/2 UARTs
(10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control).
3.
Up to 3 SPIs (42
Mbits/s), 2 with muxed full-duplex I 2S to achieve audio class accuracy via internal
audio PLL or external clock.
4.
2 × CAN interfaces (2.0B
Active).
5.
SDIO interface.
- Advanced connectivity
1.
USB 2.0 full-speed
device/host/OTG controller with on-chip PHY
2.
USB 2.0
high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip
full-speed PHY and ULPI
3.
10/100 Ethernet MAC with
dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
- Clock, reset and supply management.
1.
1.8 V to 3.6 V
application supply and I/Os.
2.
POR, PDR, PVD and
BOR.
3.
4-to-26 MHz
crystal oscillator.
4.
Internal 16 MHz
factory-trimmed RC (1% accuracy).
5.
32 kHz oscillator
for RTC with calibration.
6.
Internal 32 kHz RC
with calibration.
- RTC: subsecond accuracy, hardware calendar
Package Contains:
- STM32 Development Board+ Mini USB cable.
For More Schematic and Sample Codes: CLICK HERE
