Overview
ARM Board introduces you to the NXP
(founded by Philips) LPC2129 family of ARM processor-based devices. ARM
Development board allows you to quickly create and test programs
for this advanced architecture.ARM development Board connects to your PC
using the serial port or USB interface. Two Serial and two CAN interfaces
make this board a great starting point for your next ARM project.
ARM LPC2129 Project Board
Features:
- MINIARM7 KIT is Very Easy to Use for Learners and Project Purpose
- All the Boards are Breakout Boards - Main baord and Daughter Board
- Main Board Incudes Power supply , 2 RS232 Ports, JTAG Connecter , CAN
- Daughter Board Includes Crystal, ARM Chip and Burgconnecters connected to Ports with names
- MINIARM -LPC 2129 Incudes CAN Chips
- 16/32-bit ARM7TDMI-S microcontroller
- 16 kB on-chip RAM,256 kB Flash Program Memory supports upto 60 MHz frequency.
- Two interconnected CAN interfaces with advanced acceptance filters.
- Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
- Multiple serial interfaces including two UARTs (16C550),
- Two 32-bit timers (with four capture and four compare channels), PWM unit (six outputs), Real Time Clock and Watchdog.
- Up to forty-six 5V tolerant general purpose I/O pins.
- On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
- Two low power modes: Idle and Power-down.
- CPU operating voltage range of 1.65V to 1.95V(1.8 V ±0.15 V).
- I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.
For Sample Codes Click Here
