PIC Development Board- USB

Quick Overview : 
PICs are popular with both industrial developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes, availability of low cost or free development tools, and serial programming (and re-programming with flash memory) capability. They are also commonly used in educational programming.

1.  Power supply, 5V-12V

2.  40 pin ZIF socket for IC mount.

3.  ISP connector.

4.  Reset

5.  Node connector

6.  4x1  7 segment display

7.  26 pin raspberry connector

8.  Arduino Shield footprint

9.  ULN 2803 driver

10. I2C bus

11. SPI bus

12. XBEE footprint/ XBEE Adaptor module

13. FT232 breakout board connector

14. DC 3.3V connectors

15. DB-9 female connector

16. 8x1 LED’s

17. 8 way DIP switch

18. RTC Module

19. EEPROM

20. 2x5x2 jumper node.

21. DC 5V connectors

22. 3 Pot for Analog Variation.

23. 4x1 keypad

24. 16x2 LCD connectors

25. Node connector 

26. 4x4 Matrix Keypad

27. DC 12V connectors

28. Power ON switch

Features :

• High quality PIC microcontroller development board.
• The DIP40 locking device, easy to remove the PIC microcontroller for reuse.
• USB-FT232 Driver.
• 8 independent LED.
• 1 * 4 independent keys.
• 4* 4 keypad matrix.
• RTC DS1307 with battery connector
• AT24C02 I2C external memory.
• I2C EEPROM Interfaces
• The MAX232 chip RS232 communication.
• 3 ADC potentiometer input conversion.
• 16X2 LCD interface (character display).
• All IO ports pin have extraction and clearly marked.
• On Board Power supply 3.3V,5V 12V,GND.
• 8 pin DIP switches.
• 3 ADC potentiometers.
• RS232 Connector.
• On board ISP Programmer.
• The board also has inbuilt Xbee footprint.
• Stackable Arduino shields.
• Raspberry Pi expansion connectors.
• ON/OFF slide switch.
• I2C bus.
• SPI Bus.
• FT232 Breakout board connector.
• External jumper nodes.
• Board is equipped with LCD 2x16 connector 
• Quartz crystal 20 MHz.
• ULN 2803 To drive Stepper Motor& Relays.
• Reset button.
• Power plug-in DC Socket.
• Power supply indicator LED.
• Test led for Tx, Rx.
• 4 digit 7Seg Multiplexed Display.
• Pin outs for 12V,5V,3.3V,GND.
• All IO’s are connected by brug stripps for easy connection.    

For Sample codes, Schematics & Tutorials CLICK HERE

PIC Development Board

Quick Review : 

PICs are popular with both industrial developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes, availability of low cost or free development tools, and serial programming (and re-programming with flash memory) capability. They are also commonly used in educational programming .

1.  Power supply, 5V-12V

2.  40 pin ZIF socket for IC mount.

3.  ISP connector.

4.  Reset

5.  Node connector

6.  4x1  7 segment display

7.  26 pin raspberry connector

8.  Arduino Shield footprint

9.  ULN 2803 driver

10. I2C bus

11. SPI bus

12. XBEE footprint/ XBEE Adaptor module

13. FT232 breakout board connector

14. DC 3.3V connectors

15. DB-9 female connector

16. 8x1 LED’s

17. 8 way DIP switch

18. RTC Module

19. EEPROM

20. 2x5x2 jumper node.

21. DC 5V connectors

22. 3 Pot for Analog Variation.

23. 4x1 keypad

24. 16x2 LCD connectors

25. Node connector 

26. 4x4 Matrix Keypad

27. DC 12V connectors

28. Power ON switch

Features :

High quality PIC microcontroller development board.

The DIP40 locking device, easy to remove the PIC microcontroller for reuse.

8 independent LED.

1 * 4 independent keys.

4* 4 keypad matrix.

RTC DS1307 with battery connector

AT24C02 I2C external memory.

I2C EEPROM Interfaces

The MAX232 chip RS232 communication.

3 ADC potentiometer input conversion.

16X2 LCD interface (character display).

All IO ports pin have extraction and clearly marked.

On Board Power supply 3.3V,5V 12V,GND.

8 pin DIP switches.

3 ADC potentiometers.

RS232 Connector.

On board ISP Programmer.

The board also has inbuilt Xbee footprint.

Stackable Arduino shields.

Raspberry Pi expansion connectors.

ON/OFF slide switch.

I2C bus.

SPI Bus.

FT232 Breakout board connector.

External jumper nodes.

Board is equipped with LCD 2x16 connector 

Quartz crystal 20 MHz.

ULN 2803 To drive Stepper Motor& Relays.

Reset button.

Power plug-in DC Socket.

Power supply indicator LED.

Test led for Tx, Rx.

4 digit 7Seg Multiplexed Display.

Pin outs for 12V,5V,3.3V,GND.

All IO’s are connected by brug stripps for easy connection.

For Sample codes , Schematics & Tutorials  CLICK HERE

Serial EEPROM Board

Quick Overview :
The AT24CXX EEPROM Board is a storage tool for EEPROM with I2C interface, It is a non-volatile memory module

Features :

• Highly reliable.
• High performance CMOS technology serial 4K EEPROM in DIP packaging.
• It offers significant advantages in low-power and low-voltage applications.
• The 24C04 EEPROM uses the I²C addressing protocol.
• Wide operating volatge  3.0 - 5.5v.
• Outputs are provided through 5 pin Connector.

For More Details , Sample Codes & Tutorials CLICK HERE

GSM GPRS SIM900A Modem-Compatible for Arduino

Quick Overview : 
This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900A.


The Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet.

Features : 

• Dual-Band GSM/GPRS 900/ 1800 MHz
• TTL data(RX,TX,GND).
• ESD Compliance.
• SMA connector with GSM Antenna 
• SIM Card holder.
• Configurable baud rate
• Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.
• Stackable interfaces.
• Power requirements : It is recommended that your Arduino  board be powered with an external power supply.
• Package Includes: GSM Modem Shield.

Applications : 

• Industrial automation.
• GPRS based data logging.
• GPRS and GPS application.
• Home automation.
• Health monitoring. 
• Agriculture automation.
• Vehicle tracking.
• Remote monitoring and controlling.
• GPRS based Weather report logging. 
• GSM GPRS based Security alert. 
• GPRS based remote terminal for file transfer.
• IVRS.
• Bulksms sending.

For More Details , Sample codes & Tutorials CLICK HERE

8 Channel Relay Board- Serial

Quick Overview
This is Eight  Channel relay board controlled by Serially. The Serial relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

Features :

• 8 SPDT Relay channels (7A 250V,12A 120V,10A 125VAC, 10A 28VDC).
• Power supply:12VDC 1AMP
• Current consumption: 400 mA.
• LED indication for relay & power supply.
• Design based on highly proven IC ULN2803 as driver. 
• TTL output.
• Status LEDs.

For More Details , Sample codes & Tutorials CLICK HERE

2Pcs 32 Pin SSOP Prototype PCB

Quick Overview
Adapter for standard 32 SSOP SMD Parts to convert to standard 32 Pin DIP size.This SSOP breakout board is a PCB which will interface an SSOP package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.Simply solder-on your 32-pin SSOP form-factor IC, along with some 0.1-inch-pitch headers, and you will have a usable, breadboard-friendly unit. 

Features 

• Solid Construction
• Plated Through Holes
• Sutable for Mounting in Standard 32 Pin DIP Configuration.

For More Details , Sample codes & Tutorials CLICK HERE

XBEE Development Board

Quick Overview
This is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Development Board, attach a RS232 cable, and you will have direct access to the serial and programming pins on the XBee unit.

Features

• Compatible with all XBee modules( Series 1 and Series 2.5, standard and Pro ).
• On board 3V3 and 5V Volatge regulator.
• On Board Power(PWR) LED Indicator.
• Status LEDs ( RXD,TXD).
• All XBee Pins are available at Standard Bergstrip( 2.54mm Pitch).
• On board RESET switch.
• DC Adapter for  Power options.

For More Details , Sample codes & Tutorials CLICK HERE