Quick Overview :
PICs are popular with both industrial developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes, availability of low cost or free development tools, and serial programming (and re-programming with flash memory) capability. They are also commonly used in educational programming.
1. Power supply, 5V-12V
2. 40 pin ZIF socket for IC mount.
3. ISP connector.
4. Reset
5. Node connector
6. 4x1 7 segment display
7. 26 pin raspberry connector
8. Arduino Shield footprint
9. ULN 2803 driver
10. I2C bus
11. SPI bus
12. XBEE footprint/ XBEE Adaptor module
13. FT232 breakout board connector
14. DC 3.3V connectors
15. DB-9 female connector
16. 8x1 LED’s
17. 8 way DIP switch
18. RTC Module
19. EEPROM
20. 2x5x2 jumper node.
21. DC 5V connectors
22. 3 Pot for Analog Variation.
23. 4x1 keypad
24. 16x2 LCD connectors
25. Node connector
26. 4x4 Matrix Keypad
27. DC 12V connectors
28. Power ON switch
Features :
- High quality PIC microcontroller development board.
- The DIP40 locking device, easy to remove the PIC microcontroller for reuse.
- USB-FT232 Driver.
- 8 independent LED.
- 1 * 4 independent keys.
- 4* 4 keypad matrix.
- RTC DS1307 with battery connector
- AT24C02 I2C external memory.
- I2C EEPROM Interfaces
- The MAX232 chip RS232 communication.
- 3 ADC potentiometer input conversion.
- 16X2 LCD interface (character display).
- All IO ports pin have extraction and clearly marked.
- On Board Power supply 3.3V,5V 12V,GND.
- 8 pin DIP switches.
- 3 ADC potentiometers.
- RS232 Connector.
- On board ISP Programmer.
- The board also has inbuilt Xbee footprint.
- Stackable Arduino shields.
- Raspberry Pi expansion connectors.
- ON/OFF slide switch.
- I2C bus.
- SPI Bus.
- FT232 Breakout board connector.
- External jumper nodes.
- Board is equipped with LCD 2x16 connector
- Quartz crystal 20 MHz.
- ULN 2803 To drive Stepper Motor& Relays.
- Reset button.
- Power plug-in DC Socket.
- Power supply indicator LED.
- Test led for Tx, Rx.
- 4 digit 7Seg Multiplexed Display.
- Pin outs for 12V,5V,3.3V,GND.
- All IO’s are connected by brug stripps for easy connection.
For Sample codes, Schematics & Tutorials CLICK HERE
