Research Design Lab

                                                                EXPERIMENT NO 5 

                                                              Liquid Crystal Display

Aim: 

To interface LCD display with ESP32-Microcontroller module.

Description: 

To display the message on the LCD screen.

Hardware required: 

ESP32-Microcontroller Development board and FRC Cable

Procedure: 

1. Connect P2 port and SV1(LCD 16*2 Display) port using FRC cable as shown above. 

2. Connect the USB cable to the board. 

3. Open Arduino IDE .Select DOIT ESP32 DEVKIT V1in boards and select COM port. 

4. Write the program, verify and Upload it. 5. Now you can see the output on LCD.