Digital Dimmer Module
The dimmer board enabled with snubber circuit, especially recommended for use on inductive loads (Motor/Fan), because of their high commutation performance. The dimmer board controls up to 0-600V AC 50/60Hz.4 bit 16 levels of input can be given from any controllers/PLC to control dimming 0-100% or ON/OFF.
Features:
- Dimming method : Phase dimming
- On/Off and dimming control.
- Circuit enabled with snubber.
- Auto Zero cross detection
- Accurate firing angle control and smooth dimming.
- Operating Voltage 12V/24V DC.
- Isolated power section from the input.
- 0-100% dimming.
- Load Capacity 6 Amp AC (Up to 1500 Watt).
- Works from any microcontroller input.
- Control up to 250V.
APPLICATIONS :
- LED light dimming using phase control
- Motor/Fan speed control
- High speed ON/OFF control application
- Heater/Temperature control application
- PID Temperature control System
- PID AC single phase speed control system.
Specifications:
Digital Input Voltage(D0-D1) | Max input voltage 5V |
Operating Voltage | 5V |
Control level (0-100%) | 16 level digital input |
Triac Max Load current | 6A |
Max Voltage | 250V |
Frequency | 50/60 Hz |
Dimension (L * W) | 50MM * 30MM |
Weight | 20g |
Fig A) shows 25% dimming for given voltage,when D3=1,D2=0,D1=1,D0=0
Fig B) shows 50% dimming for given voltage,when D3=0,D2=1,D1=1,D0=1
Fig C) shows 100% dimming for given voltage,when D3=0,D2=0,D1=0,D0=0Dimmer module-Control:
Table shows 16 level of dimming control of load 0-100%
INPUT | OUTPUT | |||
D3 | D2 | D1 | D0 | Dimming % |
1 | 1 | 1 | 1 | 0% |
1 | 1 | 1 | 0 | 5% |
1 | 1 | 0 | 1 | 10% |
1 | 1 | 0 | 0 | 15% |
1 | 0 | 1 | 1 | 20% |
1 | 0 | 1 | 0 | 25% |
1 | 0 | 0 | 1 | 30% |
1 | 0 | 0 | 0 | 40% |
0 | 1 | 1 | 1 | 50% |
0 | 1 | 1 | 0 | 60% |
0 | 1 | 0 | 1 | 65% |
0 | 1 | 0 | 0 | 70% |
0 | 0 | 1 | 1 | 75% |
0 | 0 | 1 | 0 | 80% |
0 | 0 | 0 | 1 | 85% |
0 | 0 | 0 | 0 | 100% |
Package Contains
- Digital Dimmer Module
- Datasheet (Digital Dimmer Module)
- Circuit Diagram (Digital Dimmer Module)
- Schematic (ATMEL)
- Schematic (PIC)
- Schematic (MSP430)
- Code (ATMEL)
- Code (PIC)
No comments:
Post a Comment