GSM GPRS SIM800C Modem- Arduino Compatible

Overview:

This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIM800C Modem.

Features:

·         Quad-Band 850/900/1800/1900MHz

·         TTL data(RX,TX,GND).

·         ESD Compliance.

·         Enable with Audio jack.

·         SMA connector with GSM Antenna 

·         SIM Card holder.

·         Stacking Support Both Arduino UNO and Mega

·         Buck DC to DC MIC29302  power supply 

·         Hard and soft UART selection  Enabled with jumper setting

·         Configurable baud rate

·         Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.

·         Power requirements : It is recommended that your Arduino  board be powered with an external power supply.

·         Package Includes: GSM Modem Shield.

·         High quality PCB FR4 Grade with FPT Certified.

Applications:

·         Industrial automation.

·         GPRS based data logging.

·         GPRS and GPS application.

·         Home automation.

·         Health monitoring. 

·         Agriculture automation.

·         Vehicle tracking.

·         Remote monitoring and controlling.

·         GPRS based Weather report logging. 

·         GSM GPRS based Security alert. 

·         GPRS based remote terminal for file transfer.

·         IVRS.

·         Bulksms sending.

SIM800C General features

·         Quad-band 850/900/1800/1900MHz

·         GPRS multi-slot class 12/10

·         GPRS mobile station class B

·         Compliant to GSM phase 2/2+: Class 4 (2 W @ 850/900MHz)

                                             Class 1 (1 W @ 1800/1900MHz)

·         Dimensions: 17.6*15.7*2.3mm

·         Weight: 1.3g

·         Control via AT commands: (3GPP TS 27.007, 27.005 and SIMCom enhanced AT Commands)

·         Supply voltage range 3.4 ~ 4.4V

·         Low power consumption

·         Operation temperature:-40℃ ~85℃.

Specifications for GPRS Data

·         GPRS class 12: max. 85.6 kbps (downlink/uplink)

·         PBCCH support

·         Coding schemes CS 1, 2, 3, 4

·         PPP-stack

·         USSD.

Specifications for SMS via GSM/GPRS

·         Point to point MO and MT

·         SMS cell broadcast

·         Text and PDU mode.

Software features

·         0710 MUX protocol

·         Embedded TCP/UDP protocol

·         FTP/HTTP

·         MMS

·         POP3/SMTP

·         DTMF

·         Jamming Detection

·         Audio Record

·         SSL

·         Bluetooth 3.0(optional).

Specifications for voice

·         Tricodec: Half rate (HR), Full rate (FR),Enhanced Full rate (EFR)

·         AMR: Half rate (HR),Full rate (FR)

·         Hands-free operation （Echo suppression).

Interfaces:

·         42 SMT pins including

·         Analog audio interface

·         RTC backup

·         USB interface

·         Serial interface

·         Interface to external SIM 3V/1.8V

·         GPIO

·         ADC

·         GSM Antenna pad

·         Bluetooth Antenna pad.

Compatibility:

·         AT cellular command interface.

Certifications

·         CE,FCC,GCF,TA,ROHS,REACH,CTA,CCC  

For More Schematic and Samples : CLICK HERE