Pages

Friday, 16 December 2016

ARM Development Board LPC2129-Trainer Kit

OVERVIEW:

LPC2129 is a single-chip 32-bit microcontroller with 256KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 16KB RAM having Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL. This IC also supports Interrupt Controller, 2 SPI serial interfaces, Two UARTs, I2C serial interface, PWM unit with up to 6 PWM outputs, Two timers (7 capture/compare channels),  4-channels 10bit ADC, 2 CAN channels. 

 Features:
  • High quality ARM development board.
  • Power supply, 9V-12V 
  • 52 pin Female burg connector for various Arm controller mount.
  • I2C bus.
  • 2- CAN busses
  • USB-FT232 Driver.
  • Node connectors
  • 4x1  7 segment display
  • Raspberry Pi expansion connectors.
  • Stackable Arduino shields.
  • ON/OFF slide switch.
  • SPI bus
  • DC 3.3V connectors
  • DC 5V connectors
  • 2- DB-9 female connector.
  • External jumper nodes.
  • The MAX232 chip RS232 communication.
  • All IO ports pin have extraction and clearly marked.
  • On Board Power supply 3.3V,5V,GND.
  • On board ISP Programmer.
  • 8x1 LED’s
  • 8 way DIP switch
  • Micro SD memory card slot
  • 6 Channel 5V to 3.3V Bi-directional level converter
  • 3 Analog pot.
  • 16x2 LCD connectors
  • 4x4 Matrix Keypad
  • Power plug-in DC Socket.
  • Test led for Tx, Rx.
  • Power ON switch.
  • All IO’s are connected by brug stripps for easy connection.
  • High quality PCB FR4 Grade with FPT Certified.

    1. Power supply, 5V-9V
    2. Power ON switch
    3. USB Programming port **
    4. DC 3.3V connectors
    5. ARM in built USB port
    6. DB-9 serial female connector-1
    7. DB-9 serial female connector-2
    8. Micro SD memory card connector **
    9. Node connector
    10. Variable resistor POT
    11. CAN bus*
    12. 4x1 Keypad
    13. 16x2 LCD connectors
    14. Node connector
    15. 8 way DIP switch
    16. Bi-Directional Voltage Level Converter (3.3V-5V)
    17. 8x1 LED’s
    18. 52 Pin female header for mounting different ARM processors
    19. ARM LPC 2129
    20. USB to TTL FT232 external connector
    21. 4x1 7 Segment display
    22. External I2C bus connector
    23. Node connectors
    24. Stack-able header for Arduino Shields.
    25. 26 pin raspberry connector.
    26. Program/Run Mode selector
    27. External SPI bus connector
    *Optional
    ** SD card holder and mini USB port are placed at the bottom of the PCB.

    For More Schematic and Sample Codes: CLICK HERE
    Posted by at