OVERVIEW:
The board can be used in applications where dimming of 230V/50Hz AC power is required like dimming of bulb or fan.
FEATURES:
- On/Off and dimming control.
- Snubber circuit enable.
- Accurate firing angle control and smooth dimming.
- Operating Voltage 5V DC.
- Isolated power section from the input.
- 0-100% dimming.
- WiFi Enabled.
- Typical Power handling upto 1800Watts.
- Maximum power handling 2760Watts *.
- High quality PCB FR4 Grade with FPT Certified.
ESP8266 ESP-07 Features:
- SDIO 2.0, SPI, UART
- 32-pin QFN package
- Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
- Integrated RISC processor, on-chip memory and external memory interfaces
- Integrated MAC/baseband processors
- Quality of Service management
- I2S interface for high fidelity audio applications
- On-chip low-dropout linear regulators for all internal supplies
- Proprietary spurious-free clock generation architecture
- Integrated WEP, TKIP, AES, and WAPI engines.
ESP8266 ESP-07 Specifications:
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 1.1/2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3).
BTA12 Triac Features:
- Blocking Voltage to 800 V
- On-State Current Rating of 12 A RMS at 25°C
- Uniform Gate Trigger Currents in Three Quadrants
- High Immunity to dV/dt − 1500 V/s minimum at 125°C
- Minimizes Snubber Networks for Protection
- Industry Standard TO-220AB Package
- High Commutating dI/dt − 1.5 A/ms minimum at 125°C
- Internally Isolated (2500 VRMS)
- These Devices are Pb−Free and are RoHS Compliant*
For More Schematic and Sample Codes: CLICK HERE
