SSR 230V/8A Dimmer-ON/OFF Switch

OVERVIEW:

The  SSR switch  ON / OFF and  16 level Dimming can be controlled using controller , switches  and PLC logics .This switch can be used control light , FAN, power socket ,  Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

Features:

• On/Off  and dimming control.
• Snubber circuit enable.
• Accurate firing angle control and smooth dimming.
• Operating Voltage 5V DC.
• Isolated power section from the input.
• 0-100% dimming.
• Typical Power handling upto 1800Watts.
• Maximum power handling 2760Watts *.
• High quality PCB FR4 Grade with FPT Certified.

BTA12 Triac Features:

• Blocking Voltage to 800 V
• On-State Current Rating of 12 A RMS at 25°C
• Uniform Gate Trigger Currents in Three Quadrants
• High Immunity to dV/dt − 1500 V/s minimum at 125°C
• Minimizes Snubber Networks for Protection
• Industry Standard TO-220AB Package
• High Commutating dI/dt − 1.5 A/ms minimum at 125°C
• Internally Isolated (2500 VRMS)
• These Devices are Pb−Free and are RoHS Compliant*

For More Schematic and Codes: CLICK HERE

Bluetooth-SSR 230V/8A Dimmer-ON/OFF Switch

OVERVIEW:

The board can be used in applications where dimming of 230V/50Hz AC power is required like dimming of bulb or fan.

FEATURES:

• On/Off  and dimming control.
• Snubber circuit enable.
• Accurate firing angle control and smooth dimming.
• Operating Voltage 5V DC.
• Isolated power section from the input.
• 0-100% dimming.
• Bluetooth Enabled.
• Typical Power handling upto 1800Watts.
• Maximum power handling 2760Watts *.
• High quality PCB FR4 Grade with FPT Certified.

BTA12 Triac Features:

• Blocking Voltage to 800 V
• On-State Current Rating of 12 A RMS at 25°C
• Uniform Gate Trigger Currents in Three Quadrants
• High Immunity to dV/dt − 1500 V/s minimum at 125°C
• Minimizes Snubber Networks for Protection
• Industry Standard TO-220AB Package
• High Commutating dI/dt − 1.5 A/ms minimum at 125°C
• Internally Isolated (2500 VRMS)
• These Devices are Pb−Free and are RoHS Compliant*

FOR MORE SCHEMATICS AND SAMPLE CODE: CLICK HERE

WiFi-SSR 230V/8A Dimmer-ON/OFF Switch

OVERVIEW:

The board can be used in applications where dimming of 230V/50Hz AC power is required like dimming of bulb or fan.

FEATURES:

• On/Off  and dimming control.
• Snubber circuit enable.
• Accurate firing angle control and smooth dimming.
• Operating Voltage 5V DC.
• Isolated power section from the input.
• 0-100% dimming.
• WiFi Enabled.
• Typical Power handling upto 1800Watts.
• Maximum power handling 2760Watts *.
• High quality PCB FR4 Grade with FPT Certified.

ESP8266 ESP-07 Features:

• SDIO 2.0, SPI, UART
•     32-pin QFN package
•     Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
•     Integrated RISC processor, on-chip memory and external memory interfaces
•     Integrated MAC/baseband processors
•     Quality of Service management
•     I2S interface for high fidelity audio applications
•     On-chip low-dropout linear regulators for all internal supplies
•     Proprietary spurious-free clock generation architecture
•     Integrated WEP, TKIP, AES, and WAPI engines.

ESP8266 ESP-07 Specifications:

•     802.11 b/g/n
•     Wi-Fi Direct (P2P), soft-AP
•     Integrated TCP/IP protocol stack
•     Integrated TR switch, balun, LNA, power amplifier and matching network
•     Integrated PLLs, regulators, DCXO and power management units
•     +19.5dBm output power in 802.11b mode
•     Power down leakage current of <10uA
•     Integrated low power 32-bit CPU could be used as application processor
•     SDIO 1.1/2.0, SPI, UART
•     STBC, 1×1 MIMO, 2×1 MIMO
•     A-MPDU & A-MSDU aggregation & 0.4ms guard interval
•     Wake up and transmit packets in < 2ms
•     Standby power consumption of < 1.0mW (DTIM3).

BTA12 Triac Features:

• Blocking Voltage to 800 V
• On-State Current Rating of 12 A RMS at 25°C
• Uniform Gate Trigger Currents in Three Quadrants
• High Immunity to dV/dt − 1500 V/s minimum at 125°C
• Minimizes Snubber Networks for Protection
• Industry Standard TO-220AB Package
• High Commutating dI/dt − 1.5 A/ms minimum at 125°C
• Internally Isolated (2500 VRMS)
• These Devices are Pb−Free and are RoHS Compliant*

For More Schematic and Sample Codes: CLICK HERE

Bluetooth Robo UNO Atmega328 Development Board

OVERVIEW:

Open source Bluetooth Robot Hardware is intended to serve as a resource for efforts focusing on Open and Open Source mechanical ,electrical  and mobile application integration , with a particular focus on projects that may be useful in robotics applications, robotics research and education.

PRODUCT DESCRIPTION:

Robot is controlled by a android mobile phone with remote control application installed. Initially both the Bluetooth devices should be paired.If any button is pressed a byte corresponding to the button presses is received at the other end of the Bluetooth receiver. The microcontroller is programmed to take appropriate movement action for a given input. These decisions will be used to driver the motors forward, backward, left and right via l298 motor driver.

For more Schematics and Sample Codes: Click Here