Energy Management System - EMS

The majority of manufacturers want to install Energy Management Systems in their factories to reduce energy consumption , predict failures and  identify root cause abnormalities. EMS Platform allows users to monitor energy consumption information, accurately evaluate energy costs, and optimize energy efficiency by 8-10%. 

• Centralized monitoring with automatic pre-warning Alarm
• Real-time End to end traceability of consumption
• Centralised monitoring with automatic pre-warning Alarm
• Visibility of utilization of utilities and track them to set baseline values saving from penalties  
• Improve stand-by operation &  energy cost per unit
• Eliminate routine waste & reduce energy cost 
• Proactive alerts of failure and disturbances
• Enable management with KPI views to set Utility Goals
• Reduction of production costs and Energy Efficiency
• Early detection of potential problems leads to increased uptime Maintenance activities , improved Safety and longer machine lifespan.
• Minimize Unplanned Downtime and reduce the maintenance costs & time.
• Remote & real-time monitoring system helps in achieving high operation efficiency

EMS Modules

• Energy Consumption overview dashboard 
• Load by Machine & Circuit 
• Report showing loads, leakage, energy & power factor .
• Potential circuit or machine failure
• Condition detection - under loaded, overloaded, down
• Peak hours/demand
• Alert on anomalies  
• Generator run hours & Fuel Consumption 
• Advanced power Analytics for root cause  analysis  
• Meter Status 
• Demand vs Actual consumption 
• Machine Utilization and Energy Efficiency

For more info: CLICK HERE

LiFi Nano V2

LiFi Nano v2 is an easy-to-use, plug-and-play evaluation platform for a wide array of visible light communication applications in consumer, wearables, industrial, medical and Internet of Things (IoT) markets.LiFi Nano consists of two modules, LiFi transmit module connected to the lighting LED and LiFi receive module connected to the host communicating system 

Feature

• Support baud rate 38400.

• 6-15 feet distance, distance can be increased by changing the LED wattage.

• High-intensity LED Light.

• Domestic Ceiling/wall mounting focus LED light can be used for communication.

• Plug-and-Play with a simple configuration.

Applications:

• Indoor wireless open optical communication.

• Indoor navigation.

• Underwater visible light communication.

• Smart indoor blind assistive application.

• Vehicle-to-vehicle communication.

• Monitor as a transmitter for Data Communication.

• Preventing Phishing Attacks using One Time Password and User Machine Identification.

• Supermarket navigation system and discount information based on location.

• Smart LIFI-based Car Parking system.

• Smart Location Aware of Services.

• Visible light positioning for asset tracking.

• POSITIONING TECHNIQUES FOR ACCURATE LOCALIZATION mobile robot navigation.

• Integrated, underwater optical /acoustic communications system.

• Visible Light Communication Based Traffic Information Broadcasting Systems.

• Li-Fi wireless optical communication.

For more info : CLICK HERE

LPC1768 ARM Cortex M3 Development Board-Trainer Kit

 Start Your Embedded System Design Journey Today..!

LPC1768 essential development features a plug and play design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program/application development. LPC1768 Development Trainer Kit equipped with on board IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many educational institutions and R&D LAB across the world.

Features:

• Plug & Play Interface Connectivity

• Professional EMI/RFI Complaint PCB Layout Design

• Modular Block design makes Easy access & quick Prototyping 

• FRC connectivity features minimize the connection Error.

• High Quality Grade PCB withwooden Enclosure. 

• Stackable daughter board LPC2129 in-built CAN Module.

• On board debugging JTAG Option 

• Controller Area Network (CAN) transceiver

• USB onboard programming 

• 8 interfacing LED’s.

• 1 * 4 interfacing keys.

• 4* 4 interfacing keypad matrix.

• Two channel RS232 port for communication.

• 3 ADC potentiometer input interface. 

Scope of Learning Experiments:

• LED blinking

• 8 bit LED Left shift, Right shift and counting operation

• Keypad  Interrupt Interface

• 16*2 LCD interface

• Matrix Keypad Interface

• ADC& DAC interface

• Traffic Light Signal Interface

• 8 bit DIP switch interface

• 7 Segment interface

• L298 Driver for DC Motor and Stepper motor interface

• Elevator Interface

• Buzzer, Relay interface

• RS485, RS232 serial communication

• UART Operation

• PWM Interface

• RTC DS1307I2C protocol interface

• AT24C04 EEPROM I2C protocol interface

• RF/WiFiCommunication

• SPI protocol interface

• Temperature Sensor Interface

• Automatic Number Plate Recognition

For more info contact us on 8088423347 or email us to crm@rdltech.in

Industrial Data Logger 4G LTE

Intelligent Data Logger product is designed to seamlessly integrate with the IoT and Analytical processing systems. Supporting Multiple IO Interfaces, Protocols, and Secure Data Logger communication are perfect for creating a custom Remote Monitoring Solution. Industrial Data Logger 4.0 can be used to build the custom industrial solution for monitoring and controlling PLC and SCADA, HMI, VFD Motors, servo, Valves, energy meter, actuators, relays, encoder, rfid and finger print readers, industrial sensors and many more with below mentioned operational benefits.

Features:

12 x Isolated Analog Input Channel 0-10V , 0-24v , 4-20mA.16 Bit Resolution and 860SPS 12 x isolated Analog Input Channel 0-10V , 0-24v , 4-20mA. 16 Bit Resolution and 860 SPS. 4x Isolated Digital Input 24V 3x Isolated Digital Output / PWM 24v 1x Relay (NO & C) 1x Isolated RS485 for MODBUS RTU Communication 1x Isolated Ethernet 10 / 100Mbps MODBUS TCP Communication 1x USB-Device Interface for Configuring, Monitoring and Download 1x WiFi / 2G / 4G / LTE Wireless Communication Configure and Read Multiple Slave IDs, Selectable Input Register Holding Register & Coil. Application: Remote Monitoring System(RMS) Production and process monitoring Utilities monitoring Condition monitorin Environment monitoring Industrial Smart grid Solar grid For more info contact us on 8088423347 or email us to sales@rdltech.in

USB To RS485 Converter Module

 The USB to RS485 is a fully automatic plug-and-play USB module that connects to your PC via the Universal Serial Bus (USB) port and provides robust bidirectional USB to RS-485 protocol conversion with automatic RS-485 flow control.

Features:

• Self-powered from USB.
• USB-RS485 converter provides a USB to RS485 serial interface with USB A / USB B connectors.
• EIA/TIA-485 communication interface with low power requirements.
• Output shorting is prevented by a thermal shutdown circuit.
• Supports 32 slaves on RS485 Bus.
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
• Fully integrated USB termination resistors.
• Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
• Data transfer rates from 300 baud to 5 Mbaud (RS485) at TTL levels.
• FIFO receives and transmits buffers for high data throughput.
• Device supplied pre-programmed with unique USB serial number.
• Integrated power-on-reset circuit.
• Fully integrated AVCC supply filtering - no external filtering required.
• USB 2.0 Full Speed compatible.
• FTDI‟s royalty-free VCP allow for communication as a standard emulated COM port and D2XX „direct‟ drivers provide DLL application programming interface.
• Visual indication of TX and Rx traffic via LEDs in the transparent USB connector.
• -40°C to 85°C extended operating temperature range.
• Supports devices with RS485 interface: PLC, HMI, surveillance cameras, video capture device, and fingerprint attendance machine.

APPLICATIONS

• USB to serial RS485 level converter.
• USB to RS485 industrial legacy device PLC / HMI / SCADA communication.
• USB Instrumentation PC interface
• Upgrading legacy peripherals to USB
• USB password protected file transfers.
• USB to RS485 Data Logging application
• USB to RS 485 industrial / instrumentation device Diagnostic application
• Transceivers for EMI-Sensitive Applications
• Industrial-Control Local Area Networks
• DTE/DCE interface Application
• DMX512 Lighting Control Application.

For more info contact us on 8088423347 or email us to sales@rdltech.in

Programmable IoT Edge ESP32 Digital IO Module

Programmable ESP32 WiFi Digital IO Modules can be used to build the custom solution for secure monitoring and controlling the IO. Field data collection over MODBUS RS485, Bluetooth, and USB make the monitoring and solution integration, easier than ever for IT engineers through open-source APIs.

Features :

• Open-source Hardware ESP32 dual-core 32-bit up to 240 MHz, Flash 16 MB.

• Support most of the open-source platforms for Custom Programming.

• The device offers multiple industrial protocols like MODBUS RTU, MODBUS TCP,

• JSON, MQTT, and FTP and supports secure communication SSL.

• Industrial Grade Design - Isolated & Protected IO & EMC / EMI compliance.

• Support most of the cloud platforms including Microsoft Azure & AWS etc.

• OTA Firmware upgrade supported.

• Support communication over WiFi, Bluetooth, and Modbus RTU.

• Isolated & protected 4x 24 V Digital Input & 4x 7A Relay Contact.

• Production and process monitoring.

• Utilities & Energy monitoring.

• Alarm & Automated Task application.

• Condition monitoring.

• Fire & Safety

• Andon System.

• District metering.

• Generator monitoring.

• Standard PLC & SCADA Applications

For more info contact us on 8088423347 or email to sales@rdltech.in or crm@rdltech.in

Biometric Authentication System for PLC and SCADA

 RDL Biometric Add-on Block product is designed to seamlessly integrate with the shop floor machinery. The flexible and customizable design allows you to control various operations like switching machine job operation, downtime escalation, and product loss escalation.The product is tested with all major PLC vendors and supports multiple interface options.

Features & Specifications

• Controller: STM32/ATmel  

• Memory : Flash 256KB, SD CARD 32GB

• RTC:  Built-in RTC for stamped data logging

• Communicaon:  RS485 MODBUS, Rs232, USB & Ethernet 10/100Mbps

Power supply:

• 12 to 36 volts DC Supply

Enclosure: 

• IP 20 

• Mounting: Wall / DIN Rail

Operational Benefits

Ease the authentication process by installing RDL Biometric add on the block as this supports a wide range of industrial communication protocol like RS232, RS485 and TCP/UDP Modbus and offer below mentioned operation benefits

For more info contact us on 8088423347 or visit www.researchdesignlab.com