LPC1768 ARM Cortex-M3 Development Board

Overview:

The NXP LPC1768 is an easy-to-use MCU development board designed for rapid prototyping. It is a powerful 32-bit ARM Cortex-M3 processor running upto 100 MHz with 512 KB flash and 32 KB RAM, which makes it far more capable than popular 8-bit prototyping alternatives.

Features:

• Controller: CORTEX M3 Based LPC1768 from NXP.
• Package: LQFP100.
• Clock Used: 12MHz for Controller, 32.768KHz for internal RTC.
• Power: On Board, 5V and 3.3V.
• Stackable daughter board LPC1768
• On board debugging JTAG Option
• USB onboard programming
• 8 interfacing LED’s.
• 1 * 4 interfacing keys.
• 4* 4 interfacing keypad matrix.
• Two channel RS232 port for communication.
• 3 ADC potentiometer input interface..
• 16X2 LCD interface.
• On Board Power supply 3.3V,5V 12V,GND.
• 8 pin DIP switches.
• On board voltage level converter
• Board enabled with the header for stacking the Xbee product.
• Board enabled with the header for Stacking the Arduino shields.
• ON board Micro SD card
• ON/OFF slide switch.
• RDL bus.
• External jumper nodes.
• ON board 2 channel CAN interface *
• Reset button.
• Power plug-in DC Socket.
• Power supply indicator LED.
• Test led for Tx, Rx.
• 4 digit 7Seg Multiplexed Display.
• FT232RL USB communication.
• 2- CAN busses.

Scope of Learning:

• LED blinking.
• 8 bit LED Left shift, Right shift and counting operation.
• 1X4 Keypad interfacing.
• 16X2 LCD interfacing.
• 4X4 Keypad interfacing.
• 3 Channel ADC interfacing.
• PWM interfacing with LED.
• 8 bit DIP switch interfacing.
• Buzzer interfacing.
• 7 Segment interfacing.
• ULN2803 DC Motor and Stepper motor interfacing.
• ULN2803 Relay interfacing.
• UART RS232 serial communication.
• RTC DS1307 I2C protocol interfacing.
• AT24C04 EEPROM I2C protocol interfacing.
• RF/WiFi XBEE interfacing*
• SPI protocol interfacing with RDL product.
• Ardunio GSM/GPRS shield interfacing

Package Contains:

• LPC1768 ARM Cortex-M3 Development Board+ Mini USB Cable.

For More Schematic and Samples: CLICK HERE

ATmega328 Development Board- Trainer Kit

Overview:

ATMEGA are popular with both industrial developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes, availability of low cost or free development tools. They are also commonly used in educational programs.

Product Description:

ATMEGA328 is one of the most commonly used Micro controllers with open source platform amongst many hobbyist and industrial communities. The simplicity and the low power of ATMEGA328 helps design many prototype boards which could be used in numerous applications. The ATMEGA328 includes 6 analog inputs, 14 digital I/O pins (6 amongst these could be used as PWM outputs), a crystal oscillator with 16MHz frequency.

Scope of Learning:

• LED blinking.
• 8 bit LED Left shift, Right shift and counting operation.
• 1X4 Keypad interfacing.
• 16X2 LCD interfacing.
• 4X4 Keypad interfacing.
• 3 Channel ADC interfacing.
• PWM interfacing with LED.
• 8 bit DIP switch interfacing.
• Buzzer interfacing.
• 7 Segment interfacing.
• ULN2803 DC Motor and Stepper motor interfacing.
• ULN2803 Relay interfacing.
• UART RS232 serial communication.
• RTC DS1307 I2C protocol interfacing.
• AT24C04 EEPROM I2C protocol interfacing.
• RF/WiFi XBEE interfacing.
• SPI protocol interfacing with RDL product.
• Ardunio GSM/GPRS shield interfacing

Features:

• Atmega328p- controller
• Standard I/O interface.
• Programmable with Arduino open source.
• Simple and convenient design for the hobbyist and developers.
• USB-FT232 Driver.
• 8 independent LED.
• 1 * 4 independent keys.
• 4* 4 keypad matrix.
• RTC DS1307 with battery connector
• AT24C02 I2C external memory.
• I2C EEPROM Interfaces
• The MAX232 chip RS232 communication.
• 16X2 LCD interface (character display).
• All IO ports pin have extraction and clearly marked.
• On Board Power supply 3.3V,5V 12V,GND.
• 8 pin DIP switches.
• RS232 Connector.
• The board also has inbuilt Xbee footprint.
• 3 ADC potentiometers.
• ON/OFF slide switch.
• External jumper nodes.
• Quartz crystal 16 MHz.
• ULN 2803 To drive Stepper Motor& Relays.
• Reset button.
• Power plug-in DC Socket.
• Power supply indicator LED.
• Test led for Tx, Rx.
• Pin outs for 3.3V,12V,5V,GND.
• All IO’s are connected by brug stripps for easy connection.
• High quality PCB FR4 Grade with FPT Certified.

Package Contains:

• ATmega328 Development Board.
• LCD 2X16.
• ATmega328P IC-2No's.
• Mini USB cable.
• 12V 2A Adapter
• Jumper wires-25No's.
• CD.
• Serial Cable.
• Wooden Enclosure.

For More Schematic and Samples:  CLICK HERE

ATmega328 Development Board V2

Overview:

ATMEGA are popular with both industrial developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes and availability of low cost or free development tools. They are also commonly used in educational programs.

Product Description:

ATMEGA are popular with both industrial developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes and availability of low cost or free development tools. They are also commonly used in educational programs.

Features:

• Atmega328p- controller.
• Standard I/O interface.
• Programmable with Arduino open source.
• Simple and convenient design for the hobbyist and developers.
• USB-FT232 Driver.
• 8 independent LED.
• 1 * 4 independent keys.
• 4* 4 keypad matrix.
• RTC DS1307 with battery connector.
• AT24C02 I2C external memory.
• I2C EEPROM Interfaces.
• The MAX232 chip RS232 communication.
• 16X2 LCD interface (character display).
• All IO ports pin have extraction and clearly marked.
• On Board Power supply 3.3V,5V 12V,GND.
• 8 pin DIP switches.
• RS232 Connector.
• The board also has inbuilt Xbee footprint.
• 3 ADC potentiometers.
• ON/OFF slide switch.
• External jumper nodes.
• Quartz crystal 16 MHz.
• ULN 2803 To drive Stepper Motor & Relays.
• Reset button.
• Power plug-in DC Socket.
• Power supply indicator LED.
• Test led for Tx, Rx.
• Pin outs for 3.3V,12V,5V,GND.
• All IO’s are connected by brug stripps for easy connection.
• High quality PCB FR4 Grade with FPT Certified.

Scope of Learning:

• LED blinking.
• 8 bit LED Left shift, Right shift and counting operation.
• 1X4 Keypad interfacing.
• 16X2 LCD interfacing.
• 4X4 Keypad interfacing.
• 3 Channel ADC interfacing.
• PWM interfacing with LED.
• 8 bit DIP switch interfacing.
• Buzzer interfacing.
• 7 Segment interfacing.
• ULN2803 DC Motor and Stepper motor interfacing.
• ULN2803 Relay interfacing.
• UART RS232 serial communication.
• RTC DS1307 I2C protocol interfacing.
• AT24C04 EEPROM I2C protocol interfacing.
• RF/WiFi XBEE interfacing.
• SPI protocol interfacing with RDL product.
• Ardunio GSM/GPRS shield interfacing.

Package Contains:

• ATmega328 Development Board V2+Mini USB Cable+LCD.

For More Schematic and Samples: CLICK HERE