Quick Overview : This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900A. The Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet.
Features :
Dual-Band GSM/GPRS 900/ 1800 MHz
TTL data(RX,TX,GND).
ESD Compliance.
SMA connector with GSM Antenna
SIM Card holder.
Configurable baud rate
Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.
Stackable interfaces.
Power requirements : It is recommended that your Arduino board be powered with an external power supply.
Package Includes: GSM Modem Shield.
Applications :
Industrial automation.
GPRS based data logging.
GPRS and GPS application.
Home automation.
Health monitoring.
Agriculture automation.
Vehicle tracking.
Remote monitoring and controlling.
GPRS based Weather report logging.
GSM GPRS based Security alert.
GPRS based remote terminal for file transfer.
IVRS.
Bulksms sending.
For More Details , Sample codes & TutorialsCLICK HERE
Quick Overview This is Eight Channel relay board controlled by Serially. The Serial relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.
Quick Overview Adapter for standard 32 SSOP SMD Parts to convert to standard 32 Pin DIP size.This SSOP breakout board is a PCB which will interface an SSOP package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.Simply solder-on your 32-pin SSOP form-factor IC, along with some 0.1-inch-pitch headers, and you will have a usable, breadboard-friendly unit.
Features
Solid Construction
Plated Through Holes
Sutable for Mounting in Standard 32 Pin DIP Configuration.
For More Details , Sample codes & TutorialsCLICK HERE
Quick Overview This is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Development Board, attach a RS232 cable, and you will have direct access to the serial and programming pins on the XBee unit.
Features
Compatible with all XBee modules( Series 1 and Series 2.5, standard and Pro ).
On board 3V3 and 5V Volatge regulator.
On Board Power(PWR) LED Indicator.
Status LEDs ( RXD,TXD).
All XBee Pins are available at Standard Bergstrip( 2.54mm Pitch).
On board RESET switch.
DC Adapter for Power options.
For More Details , Sample codes & TutorialsCLICK HERE
Quick Overview This is a low frequency (125Khz) RFID Reader With serial Output with range upto 15cms. The RFID Reader is designed specifically for low-frequency (125 kHz) passive tags.Frequency refers to the size of the radio waves used to communicate between the RFID system components.
Rfid based attendance system
Rfid based smart shopping system
Rfid based medical file tracking system
Rfid based inventory management system
Rfid based access control system -security
Rfid based library management system
Rfid based security guard monitoring system
Rfid based asset tracking system ,
Rfid based vehicle parking system
Rfid based toll gate collection system
Rfid hotel room access control system .
Rfid based product identification for blind
Rfid based blind indoor navigation system.
Rfid based dual authentication system for software application ,
Rfid based industry supply chain control system
Rfid based smart conveyor
Features
Low-cost method for reading passive RFID tags.
Built in Antenna
On-Board Power LED
Current Requirement <120mA
Communication RS232 Serial at 9600 baud.
Detecting Range upto 15cms.
For More Details , Sample Codes & Tutorials CLICK HERE
Quick Overview This breakout board bring all 9 pins of a DB9 connector plus a chassis pin out to male header pins and prototyping work.Pefectly use with these female to male jumper wires for breadboard connections. This breakout board isperfect for field wiring tasks and may be mounted to wall box plate or thin panel that has a DB9 cutout.
Features
All 9 pins of a DB9 connector plus a chassis pin out male header pins .
Four mounting holes.
Perfect for experimentation and prototype work.
For More Details , Sample Codes & Tutorials CLICK HERE
