Electrical Grounding & ESD Safety Monitoring System

Electrical  Grounding & ESD Safety Monitoring System  proactively alerts and protects  damage to critical infrastructure.  The  System  monitors and measures electrical ground connectivity & its  resistance ,  to indicate presence of a safe path for the dissipation of fault currents that occur during events like  lightning strikes, poor grounding  & static discharges.  RDL’s  Cutting -Edge  solution not only ensures compliance to safety standards but ensures higher uptime in potentially hazardous environments and  static protected areas.  

Application

 ● Coal mining, Oil and Gas industry 

● Fueling Station 

● Automotive Paint shop 

● Broadcast and RADAR, satellite relay station

 ● Power Grid & Substations 

● Manufacturing Industry 

● Testing, R&D Lab and Hospital 

● Cell phone tower sites.

● Data Center

● Electronic Production Industry  

Advantages / Operational benefits

•  Equipment & machinery Up time 
• Fire and safety compliance 
• Equipment protection 
• Real time Alerting system 
• Predictive Analytics & ROI

Unique Features Of the System

 

• Alerting with Fault Location 
• Accurate Earth resistance measurement 
• Bonding & Grounding Connectivity status 
• Electrical grounding history with fault Prediction 
• When outage of Primary ground connection it automatically select Alternate Ground Source 
• Grounding System Maintenance  Alert 
• Supporting for wide range of communication protocol - MODBUS TCP /RTU , JSON , MQTT , FTP.

For more info: CLICK HERE

Utilities Monitoring System

Utilities Monitoring System is the best automation system for collecting, monitoring, and optimizing energy, water, gas, and compressed air data in order to boost utilization and reliability while lowering costs. It can quickly identify and eliminate areas of waste, resulting in significant cost savings within weeks of installation.

Benefits of implementing Utilities Monitoring System

• Real-time End to end traceability of consumption
• Precise identification and analysis of the cost of utilities
• centralised monitoring with automatic pre-warning Alarm
• Visibility of utilization of utilities and track them to set baseline values saving from penalties  .
• Proactive alerts of failure and disturbances
• Enable management with KPI views to set Utility Goals
• Reduction of production costs and Energy Efficiency 

Application

• Manufacturing Industry 
• Food & beverage industry
• Healthcare 
• Pharmaceutical facilities
• Restaurant 
• Institution 
• Data center

For more info: CLICK HERE

Remote Condition Monitoring System

Condition Monitoring - Increased Reliability

Remote condition monitoring solution ideal for  motors that play a  critical role in production and sensitive applications. Operators can use Condition Monitoring System for remotely monitor the health, performance, and efficiency of the motors, as well as detect early signs of potential problems and schedule maintenance so that a fixable problem does not worsen and cause unplanned downtime 

Advantages of Condition Monitoring

 

• Proactive alerts of potential problems reduces down time
• Minimize Unplanned Downtime and reduce the maintenance costs & time. 
• Condition-based maintenance leads to increased reliability, improved uptime
• Early detection of potential problems leads to increased uptime Maintenance activities , improved Safety and longer motor lifespan. 
• Remote & real-time monitoring system helps in achieving high operation efficiency
• 
  

For more info: CLICK HERE

InsightsX - Shop Floor AI 4.0

 

Industry 4.O - Optimizing Productivity

Many manufacturers find it hard to identify those specific losses that contribute to low machine productivity as they are difficult to identify,     record  , and  analyze,  so  manufacturers  are  looking for  digitize   day-to-day manufacturing processes & support in making  the move toward smart factory transformation. Shop Floor AI 4.0 solution integrates multiple technologies in a layered architecture supporting IoT devices ,secure networking and Intelligent Applications that allow to achieve overall equipment effectiveness and improve the shop floor visibility & performance 

Digitally Transform your Shop Floor

• Unlock Hidden Production Capacity
• Minimize Unplanned Down time 
• Shorten Production Lead Time 
• Reduce Product Defect 
• Increase Machine Availability

For more info :CLICK HERE

Energy Management System - EMS

The majority of manufacturers want to install Energy Management Systems in their factories to reduce energy consumption , predict failures and  identify root cause abnormalities. EMS Platform allows users to monitor energy consumption information, accurately evaluate energy costs, and optimize energy efficiency by 8-10%. 

• Centralized monitoring with automatic pre-warning Alarm
• Real-time End to end traceability of consumption
• Centralised monitoring with automatic pre-warning Alarm
• Visibility of utilization of utilities and track them to set baseline values saving from penalties  
• Improve stand-by operation &  energy cost per unit
• Eliminate routine waste & reduce energy cost 
• Proactive alerts of failure and disturbances
• Enable management with KPI views to set Utility Goals
• Reduction of production costs and Energy Efficiency
• Early detection of potential problems leads to increased uptime Maintenance activities , improved Safety and longer machine lifespan.
• Minimize Unplanned Downtime and reduce the maintenance costs & time.
• Remote & real-time monitoring system helps in achieving high operation efficiency

EMS Modules

• Energy Consumption overview dashboard 
• Load by Machine & Circuit 
• Report showing loads, leakage, energy & power factor .
• Potential circuit or machine failure
• Condition detection - under loaded, overloaded, down
• Peak hours/demand
• Alert on anomalies  
• Generator run hours & Fuel Consumption 
• Advanced power Analytics for root cause  analysis  
• Meter Status 
• Demand vs Actual consumption 
• Machine Utilization and Energy Efficiency

For more info: CLICK HERE

LiFi Nano V2

LiFi Nano v2 is an easy-to-use, plug-and-play evaluation platform for a wide array of visible light communication applications in consumer, wearables, industrial, medical and Internet of Things (IoT) markets.LiFi Nano consists of two modules, LiFi transmit module connected to the lighting LED and LiFi receive module connected to the host communicating system 

Feature

• Support baud rate 38400.

• 6-15 feet distance, distance can be increased by changing the LED wattage.

• High-intensity LED Light.

• Domestic Ceiling/wall mounting focus LED light can be used for communication.

• Plug-and-Play with a simple configuration.

Applications:

• Indoor wireless open optical communication.

• Indoor navigation.

• Underwater visible light communication.

• Smart indoor blind assistive application.

• Vehicle-to-vehicle communication.

• Monitor as a transmitter for Data Communication.

• Preventing Phishing Attacks using One Time Password and User Machine Identification.

• Supermarket navigation system and discount information based on location.

• Smart LIFI-based Car Parking system.

• Smart Location Aware of Services.

• Visible light positioning for asset tracking.

• POSITIONING TECHNIQUES FOR ACCURATE LOCALIZATION mobile robot navigation.

• Integrated, underwater optical /acoustic communications system.

• Visible Light Communication Based Traffic Information Broadcasting Systems.

• Li-Fi wireless optical communication.

For more info : CLICK HERE

LPC1768 ARM Cortex M3 Development Board-Trainer Kit

 Start Your Embedded System Design Journey Today..!

LPC1768 essential development features a plug and play design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program/application development. LPC1768 Development Trainer Kit equipped with on board IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many educational institutions and R&D LAB across the world.

Features:

• Plug & Play Interface Connectivity

• Professional EMI/RFI Complaint PCB Layout Design

• Modular Block design makes Easy access & quick Prototyping 

• FRC connectivity features minimize the connection Error.

• High Quality Grade PCB withwooden Enclosure. 

• Stackable daughter board LPC2129 in-built CAN Module.

• On board debugging JTAG Option 

• Controller Area Network (CAN) transceiver

• USB onboard programming 

• 8 interfacing LED’s.

• 1 * 4 interfacing keys.

• 4* 4 interfacing keypad matrix.

• Two channel RS232 port for communication.

• 3 ADC potentiometer input interface. 

Scope of Learning Experiments:

• LED blinking

• 8 bit LED Left shift, Right shift and counting operation

• Keypad  Interrupt Interface

• 16*2 LCD interface

• Matrix Keypad Interface

• ADC& DAC interface

• Traffic Light Signal Interface

• 8 bit DIP switch interface

• 7 Segment interface

• L298 Driver for DC Motor and Stepper motor interface

• Elevator Interface

• Buzzer, Relay interface

• RS485, RS232 serial communication

• UART Operation

• PWM Interface

• RTC DS1307I2C protocol interface

• AT24C04 EEPROM I2C protocol interface

• RF/WiFiCommunication

• SPI protocol interface

• Temperature Sensor Interface

• Automatic Number Plate Recognition

For more info contact us on 8088423347 or email us to crm@rdltech.in