Vibration Sensor

 Vibration sensor is designed to track asset’s health and provide insights of asset conditions to the maintenance teams that may lead to equipment failure & avoid the need for major repairs. Vibration sensors are commonly used in predictive maintenance and condition monitoring

Features

• 3-axial MEMS accelerometer

• Configurable communication mode RS485 Modbus RTU / WiFi / Bluetooth

• Support monitoring 10 different set frequency components of the system.

• Built in FFT Algorithm for vibration analysis

• High resolution & measurement at up to ±16 g

• Configurable Measuring Range  ±2, ±4, ±8, ±16

• Configurable Bandwidth up to 3.2KHz

Applications

• Machine vibration monitoring, e.g.  Motors, Compressors, AHU, Gearbox, Pump etc.

• Vibration measurement and alarm triggering.

• Predictive maintenance and Condition monitoring.

FOR MORE INFO: CLICK HERE

DATASHEET:CLICK HERE

ATmega328 Development Board- Trainer Kit

 ATMGEA328 IoT Trainer Kit essential development features a plug and plays design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program/application development. ATMGEA328 IoT Trainer Kit equipped with onboard IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many educational institutions and R&D LAB across the world.

Features:

• Plug & Play Interface Connectivity.

• Professional EMI/RFI Complaint PCB Layout Design

• Modular Block design makes Easy access & quick Prototyping 

• FRC connectivity features minimize the connection Error.

• High-Quality Grade PCB with wooden Enclosure. 

• 8 interfacing LED’s.

• 1 * 4 Menu keypad.

• 4* 4 Matrix Keypad.

• RS232, RS485, USB communication port.

• 7 Segment Multiplexed Display.

• 16*2 LCD & OLED Display

• ADC & DAC Card.

• 8 bit 4 port IO.

• On Board WiFi / Bluetooth Connectivity

• 3.3 to 5V Level Converter.

• Power Supply 3.3V and 5V

• SD CARD Interface.

• RTC & EEPROM Interface.

• DC Motor/ Stepper Motor Driver.

• Relay, Buzzer.

• 1xTemperature Sensor.

• 3x Analog Test POT.

• Scope of Learning Experiments:

• LED blinking.

• 8 bit LED Left shift, Right shift and counting operation.

• Keypad  Interrupt Interface

• 16*2 LCD interface.

• Matrix Keypad Interface.

• ADC& DAC interface.

• Traffic Light Signal Interface.

• 8 bit DIP switch interface.

• 7 Segment interface.

• L298 Driver for DC Motor and Stepper motor interface.

• Elevator Interface.

• Buzzer, Relay interface.

• RS485, RS232 serial communication

•  PWM Interface

• UART Operation

•  RTC DS1307I2C protocol interface.

• AT24C04 EEPROM I2C protocol interface.

• RF/WiFiCommunication.

•  SPI protocol interface

• Temperature Sensor Interface.

For more info:CLICK HERE

Biometric Authentication System for PLC and SCADA

RDL Biometric Add-on Block product is designed to seamlessly integrate with the shop floor machinery. The flexible and customizable design allows you to control various operations like switching machine job operation, downtime escalation, and product loss escalation.

The product is tested with all major PLC vendors and supports multiple interface options.

Features & Specifications

• Controller: STM32/ATmel  

• Memory : Flash 256KB, SD CARD 32GB

• RTC:  Built-in RTC for stamped data logging

• Communicaon:  RS485 MODBUS, Rs232, USB & Ethernet 10/100Mbps

Fingerprint Sensor:

• Fingerprint image input me: <0.3 seconds

• Window area: 14x18 mm

• Matching method: Comparison method (1: 1)

• Search method (1: N)

• Characteristic file: 256 bytes

• Template file: 512 bytes

• Storage capacity: 1000 pieces

• Security Level: Five (from low to high: 1,2,3,4,5)

• Fake rate (FAR): <0.001%

• Refusal rate (FRR): <1.0%

• Search me: <1.0 seconds (1: 1000 hours, mean value)

• Host interface: UART \ USB1.1

• Communication baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, i.e., 57600bps)

• Working environment: Temperature: -20  ℃  - +40  ℃  Relave humidity: 40% RH-85% RH (no condensaon)

• Storage environment: Temperature: -40  ℃  - +85 ℃  Relave humidity: <85% H (no condensaon).

DRY contact:

• 1x SPDT Relay

Power supply:

• 12 to 36 volts DC Supply

Enclosure: 

• IP 20 

• Mounting: Wall / DIN Rail

For more info: Click Here

Datasheet       : Click Here

PIC Development Board-Trainer Kit

PIC essential development features a plug-and-play design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program / application development. PIC Development Board Trainer kit equipped with on board IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’sused in many educational  institutions and R&D LAB across the world.

Features:

• Plug & Play Interface Connectivity.

• Professional EMI/RFI Complaint PCB Layout Design

• Modular Block design makes Easy access & quick Prototyping 

• FRC connectivity features minimize the connection Error.

• High Quality Grade PCB with wooden Enclosure. 

• 8 interfacing LED’s.

• 1 * 4 Menu keypad.

• 4* 4 Matrix Keypad.

• RS232, RS485, USB communication port.

• 7 Segment Multiplexed Display.

• 16*2 LCD & OLED Display

• ADC & DAC Card.

• 8 bit 4 port IO.

• On Board WiFi / Bluetooth Connectivity

• 3.3 to 5V Level Converter.

• Power Supply 3.3V and 5V

• SD CARD Interface.

• RTC & EEPROM Interface.

• DC Motor/ Stepper Motor Driver.

• Relay, Buzzer.

• 1xTemperature Sensor.

• 3x Analog Test POT.

Scope of Learning Experiments:

• LED blinking.

• 8 bit LED Left shift, Right shift and counting operation.

• Keypad  Interrupt Interface

• 16*2 LCD interface.

• Matrix Keypad Interface.

• ADC& DAC interface.

• Traffic Light Signal Interface.

• 8 bit DIP switch interface.

• 7 Segment interface.

• L298 Driver for DC Motor and Stepper motor interface.

• Elevator Interface.

• Buzzer, Relay interface.

• RS485, RS232 serial communication

•  PWM Interface

• UART Operation

•  RTC DS1307I2C protocol interface.

• AT24C04 EEPROM I2C protocol interface.

• RF/WiFiCommunication.

•  SPI protocol interface

• Temperature Sensor Interface

DATASHEET:CLICK HERE

FOR MORE INFO:CLICK HERE

 

                 8051 Development Board- Trainer Kit

Start Your Embedded System Design Journey Today..!

8051 essential development features a plug and plays design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program/application development. 8051 Development Trainer kit equipped with onboard IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many Educational Institutions and R&D LAB across the world.

Features:

Plug & Play Interface Connectivity. Professional EMI/RFI Complaint PCB Layout Design Modular Block design makes Easy access & quickPrototyping  FRC connectivity features minimize the connection Error. High Quality Grade PCB with wooden Enclosure.  The DIP40 locking device for reuse ATMEL microcontroller. Supports 8051, AT89SXX and AT89CXX series chips 40 pin DIP package. On Board Programming. 8 interfacing LED’s. 1 * 4 Menu keypad. 4* 4 Matrix Keypad. RS232, RS485, USB communication port. Scope of Learning Experiments: LED blinking. 8 bit LED Left shift, Right shift and counting             operation. Keypad  Interrupt Interface 16*2 LCD interface. Matrix Keypad Interface. ADC& DAC interface. Traffic Light Signal Interface. 8 bit DIP switch interface. 7 Segment interface. For more info: CLICK HERE Datasheet     : CLICK HERE L298 Driver for DC Motor and Stepper motor interface. Elevator Interface. Buzzer, Relay interface. RS232 serial, RS485 and USB communication. UART Operation RTC DS1307I2C protocol interface. AT24C04 EEPROM I2C protocol interface. RF/WiFi Communication. Temperature Sensor Interface.

16*2 LCD & OLED Display ADC & DAC Card. 8 bit 4 port IO. On Board WiFi/Bluetooth Connectivity 3.3 to 5V Level Converter. Power Supply 3.3V and 5V SD CARD Interface. RTC & EEPROM Interface. DC Motor/ Stepper Motor Driver. Relay, Buzzer. 1xTemperature Sensor. 3x Analog Test POT.

ESP32 IoT Development Trainer Kit

 ESP32 IoT Development Trainer Kit essential development features a plug-and-play design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program/application development. ESP32 IoT Trainer Kit equipped with onboard IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many educational institutions and R&D LAB across the world.

Features:

Board Features On Board Programming. Plug & Play Interface Connectivity. Professional EMI/RFI Complaint PCB Layout Design Modular Block design makes Easy access & quick Prototyping  FRC connectivity features minimize the connection Error. High Quality Grade PCB with wooden Enclosure.  8 interfacing LED’s. 1 * 4 Menu keypad. 4* 4 Matrix Keypad. RS232, RS485, USB communication port. 7 Segment Multiplexed Display.

16*2 LCD & OLED Display ADC & DAC Card. 8 bit 4 port IO. On Board WiFi/Bluetooth Connectivity 3.3 to 5V Level Converter. Power Supply 3.3V and 5V SD CARD Interface. RTC & EEPROM Interface. DC Motor/ Stepper Motor Driver. Relay, Buzzer. 1xTemperature Sensor. 3x Analog Test POT.

Scope of Learning Experiments:

LED blinking. 8 bit LED Left shift, Right shift and counting operation. Keypad  Interrupt Interface 16*2 LCD interface. Matrix Keypad Interface. ADC& DAC interface. Traffic Light Signal Interface. 8 bit DIP switch interface. 7 Segment interface.

Elevator Interface. Buzzer, Relay interface. L298 Driver for DC Motor and Stepper motor interface. RS485, RS232 serial communication. UART Operation RTC DS1307I2C protocol interface. AT24C04 EEPROM I2C protocol interface. RF/WiFiCommunication. Temperature Sensor Interface.

Applications 

Generic Low-power IoT Sensor Hub  Generic Low-power IoT Data Loggers Cameras for Video Streaming Over-the-top (OTT) Devices  Speech Recognition  Image Recognition  Mesh Network Home Automation FOR MORE INFO:CLICK HERE DATASHEET    :CLICK HERE VIDEO            :CLICK HERE

Smart Building   Industrial Automation   Smart Agriculture  Audio Applications   Health Care Applications  Wi-Fi-enabled Toys   Wearable Electronics  Retail & Catering Application

ARM Development Board LPC2148-Trainer Kit

LPC2148essential development features a plug and play design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program / application development. LPC2148 Trainer Kit equipped with on board IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many educational institutions and R&D LAB across the world.

 

Features:

• Plug & Play Interface Connectivity

• Professional EMI/RFI Complaint PCB Layout Design

• Modular Block design makes Easy access & quick Prototyping 

• FRC connectivity features minimize the connection Error.

• High Quality Grade PCB with wooden Enclosure. 

• Stackable daughter board LPC2148.

• On board debugging JTAG Option 

• USB onboard programming 

• 8 interfacing LED’s.

• 1 * 4 interfacing keys.

• 4* 4 interfacing keypad matrix.

• Two channel RS232 port for communication.

• 3 ADC potentiometer input interface.

• 16X2 LCD, OLED interface.

• 46 general purpose IO

• On Board Power supply 3.3V, 5V 12V,GND.

• 8 pin DIP switches.

• On board voltage level converter

• Board enabled with the header for stacking the WiFi module.

• Board enabled with the header for stacking the Arduino shields.

• ON board Micro SD card

• ON/OFF slide switch.

• RDL bus.

• External jumper nodes.

• Reset button.

• Power plug-in DC Socket.

• Power supply indicator LED.

• Test led for Tx, Rx.

•  7Seg Multiplexed Display.

• FT232RL USB communication.

For more info: CLICK HERE

Datasheet     : CLICK HERE