Utility Monitoring System

 

Utility Monitoring System

On-line utilities monitoring

Utilities Monitoring System is the best automation system for collecting, monitoring, and optimizing energy, water, gas and compressed air data in order to boost utilization and reliability while lowering costs. It can quickly identify and eliminate areas of waste, resulting in significant cost savings within weeks of installation.

Benefits of implementing Utilities Monitoring System

• Real-time End to end traceability of consumption

• Precise identification and analysis of the cost of utilities

• centralized monitoring with automatic pre-warning Alarm

• Visibility of utilization of utilities and track them to set baseline values saving from penalties  .

• Proactive alerts of failure and disturbances

• Enable management with KPI views to set Utility Goals

• Reduction of production costs and Energy Efficiency

Application

• Manufacturing Industry 

• Food & beverage industry

• Healthcare 

• Pharmaceutical facilities

• Restaurant 

• Institution 

• Data center  

Utilities Meters

Utilities Monitoring System support all kind of utilities meters reading from remote.

For More Info, CLICK HERE

Modbus TCP Gateway

The MODBUS TCP gateway extends two way communications between the MODBUS RTU & the MODBUS TCP Network. The Gateway comes with Configuration manager that makes device configuration easier.

The MODBUS gateway fetches the Data from a variety of MODBUS Slaves- energy meters, Sensors, industrial PLC’s, and VFD through MODBUS RTU Protocol and then push to MODBUS TCP Scanner device.

Features:

• Supports MODBUS RTU/ASCII/TCP master/client

• Serial port with 2 kV isolation protection

• Ethernet 10/100 Mbps

• Supports Modbus RTU to TCP Converter

• Supports Wi-Fi /Ethernet

• Supports Modbus RTU to Modbus TCP Ethernet / WiFi Gateway

• Support Static IP or DHCP

• Supports RS232 to Ethernet / WiFi gateway

• Supports RS232 Open Data Communication

• Industrial design with -40 to 75°C operating temperature range

• Supply Input Voltage 12V - 24V

Applications:

• Production and process monitoring

• Utilities monitoring

• Condition monitoring

• Environment monitoring

• Industrial Smart grid

• Solar grid

• Cold storage monitoring

• District metering

• Water treatment

• Generator monitoring

• Green House

MODBUS RTU to Ethernet Gateway Wiring Diagram: 

MODBUS RTU to WiFi Gateway Wiring Diagram: 

 

Documents:

• Datasheet

• User Manual

Vibration Sensor

 

Vibration sensor is designed to track asset’s health and provide insights of asset conditions to the maintenance teams that may lead to equipment failure & avoid the need for major repairs. Vibration sensors are commonly used in predictive maintenance and condition monitoring.

Features

• 3-axial MEMS accelerometer

• Configurable communication mode RS485 Modbus RTU / WiFi / Bluetooth

• Support monitoring 10 different set frequency components of the system.

• Built in FFT Algorithm for vibration analysis

• High resolution & measurement at up to ±16 g

• Configurable Measuring Range  ±2, ±4, ±8, ±16

• Configurable Bandwidth up to 3.2KHz

Applications

• Machine vibration monitoring, e.g.  Motors, Compressors, AHU, Gearbox, Pump etc.

• Vibration measurement and alarm triggering.

• Predictive maintenance and Condition monitoring.

Documents

• Datasheet

PIC Development Board-Trainer Kit

Start Your Embedded System Design Journey Today..!

PIC essential development features a plug and play design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program / application development. PIC Development Board Trainer kit equipped with on board IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It's used in many educational  institutions and R&D LAB across the world.

ORDER CODE: RDL740

Features:

• Plug & Play Interface Connectivity.

• Professional EMI/RFI Complaint PCB Layout Design

• Modular Block design makes Easy access & quick Prototyping 

• FRC connectivity features minimize the connection Error.

• High Quality Grade PCB with wooden Enclosure. 

• 8 interfacing LED’s.

• 1 * 4 Menu keypad.

• 4* 4 Matrix Keypad.

• RS232, RS485, USB communication port.

• 7 Segment Multiplexed Display.

• 16*2 LCD & OLED Display

• ADC & DAC Card.

• 8 bit 4 port IO.

• On Board WiFi / Bluetooth Connectivity

• 3.3 to 5V Level Converter.

• Power Supply 3.3V and 5V

• SD CARD Interface.

• RTC & EEPROM Interface.

• DC Motor/ Stepper Motor Driver.

• Relay, Buzzer.

• 1xTemperature Sensor.

• 3x Analog Test POT.

MCU

• Only 35 single-word instructions to learn

• All single-cycle instructions except for program branches, which are two-cycle

• Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle

• Up to 8K x 14 words of Flash Program Memory, Up to 368 x 8 bytes of Data Memory (RAM), Up to 256 x 8 bytes of EEPROM Data Memory

• Pinout compatible to other 28-pin or 40/44- pin PIC16CXXX and PIC16FXXX microcontrollers

Analog Features

• 10-bit, up to 8-channel Analog-to- Digital Converter(A/D)

Peripheral Features

• Timer0: 8-bit timer/counter with 8-bit prescaler

• Timer1: 16-bit timer/counter with prescaler,

• Timer2: 8-bit timer/counter with 8-bit period register,prescaler and postscaler

• Two Capture, Compare, PWMmodules

• Synchronous Serial Port (SSP) with SPI™ (Mastermode)and I2C™ (Master/Slave)

• Universal  Synchronous Asynchronous Receiver Transmitter(USART/SCI) with 9-bit address detection

• Parallel Slave Port (PSP) – 8 bits wide with external RD,WR and CS controls (40/44-pin only)

Scope of Learning Experiments:

• LED blinking.

• 8 bit LED Left shift, Right shift and counting operation.

• Keypad  Interrupt Interface

• 16*2 LCD interface.

• Matrix Keypad Interface.

• ADC& DAC interface.

• Traffic Light Signal Interface.

• 8 bit DIP switch interface.

• 7 Segment interface.

• L298 Driver for DC Motor and Stepper motor interface.

• Elevator Interface.

• Buzzer, Relay interface.

• RS485, RS232 serial communication

•  PWM Interface

• UART Operation

•  RTC DS1307I2C protocol interface.

• AT24C04 EEPROM I2C protocol interface.

• RF/WiFiCommunication.

•  SPI protocol interface

• Temperature Sensor Interface.

Supported IC:

PIC16F74      PIC16F77     PIC16F747     PIC16F777    PIC16F871    PIC16F874    PIC16F877   PIC16F877A  PIC16F887   PIC18F452   PIC18F458  PIC18F4220  PIC18F4320  PIC18F4431  PIC18F4331   PIC18F4520   PIC18F4420   PIC18F4550  PIC18F4455    PIC18F4580   PIC18F4480  PIC18F4585   PIC18F4680    PIC18F4620    PIC18F45J10  PIC18F44J10   PIC18F44J   PIC18F43K20  PIC18F44K20  PIC18F46K20 

Package Contains :

• Development Board with Wooden Enclosure

• USB Cable.

• 12V 2A Adapter.

• FRC Cable

Documents:

• Datasheet (PIC Development Board)

Codes:

• Code (LED Sequence with Select Keys)

• Code  (7 Segment Display)

• Code  (UART)

• Code (LCD)

• Code (Keypad)

• Code (ADC)

• Code (PWM)

• Code (RTC)

• Code (RTC and 7 Segment)

MP LAB(HI-TECH_C) Sample Codes:

• Code (LED Blink)

• Code (7 Segment)

• Code (UART)

• Code (LCD)

• Code (Keypad)

• Code (ADC)

• Code (GSM)

• Code (PWM)

• Code (Relay)

• Code (RTC)

• Code (I2C)

8051 Development Board- Trainer Kit

 

Start Your Embedded System Design Journey Today..!
8051 essential development features a plug and plays design that makes it easy for connections and helps Students, hobbyists, enthusiasts, and professionals to focus more on Program/application development. 8051 Development Trainer kit equipped with onboard IO’s, communication interfaces & peripherals. It is really easy to design, experiment with, and test circuits without soldering. It’s used in many Educational Institutions and R&D LAB across the world.

ORDER CODE: RDL847

Features:

• Plug & Play Interface Connectivity.

• Professional EMI/RFI Complaint PCB Layout Design

• Modular Block design makes Easy access & quick Prototyping 

• FRC connectivity features minimize the connection Error.

• High Quality Grade PCB with wooden Enclosure. 

• The DIP40 locking device for reuse ATMEL microcontroller.

• Supports 8051, AT89SXX and AT89CXX series chips 40 pin DIP package.

• On Board Programming.

• 8 interfacing LED’s.

• 1 * 4 Menu keypad.

• 4* 4 Matrix Keypad.

• RS232, RS485, USB communication port.

• 7 Segment Multiplexed Display.

• 16*2 LCD & OLED Display

• ADC & DAC Card.

• 8 bit 4 port IO.

• On Board WiFi / Bluetooth Connectivity

• 3.3 to 5V Level Converter.

• Power Supply 3.3V and 5V

• SD CARD Interface.

• RTC & EEPROM Interface.

• DC Motor/ Stepper Motor Driver.

• Relay, Buzzer.

• 1xTemperature Sensor.

• 3x Analog Test POT.

Scope of Learning Experiments:

• LED blinking.

• 8 bit LED Left shift, Right shift and counting operation.

• Keypad  Interrupt Interface

• 16*2 LCD interface.

• Matrix Keypad Interface.

• ADC& DAC interface.

• Traffic Light Signal Interface.

• 8 bit DIP switch interface.

• 7 Segment interface.

• L298 Driver for DC Motor and Stepper motor interface.

• Elevator Interface.

• Buzzer, Relay interface.

• RS232 serial, RS485 and USB communication.

• UART Operation

• RTC DS1307I2C protocol interface.

• AT24C04 EEPROM I2C protocol interface.

• RF/WiFi Communication.

• Temperature Sensor Interface.

NOTE : Look into the datasheet for more details

Package Includes:

• Development Board with Wooden Enclosure

• USB Cable.

• 12V 2A Adapter.

Documents:

• Datasheet