ESP32-VIBRATION SENSOR

ESP32-VIBRATION SENSOR

Aim:

To extract information from vibration sensor.

Description:

To learn how to read values from a vibration sensor connected to analog pin using ESP32- Microcontroller.

Hardware required:

ESP32-Microcontroller Development board Vibration sensor.

Pin connection:

Pin Mapping:

VIBRATION SENSOR	ESP32
5V	5V
GND	GND
A/O	IO12

Procedure:

1.        The above pin connection shows how to read values from a vibration sensor using ESP32 board.

2.        Do the connections as shown in the pin diagram and pin mapping.

3.        Connect the USB cable to the board.

4.        Open Arduino IDE .Select DOIT ESP32 DEVKIT V1 in boards and select COM port.

5.        Verify the program and upload it.

6.        Now you can see the output on the serial monitor.

Program:

void setup()

{

pinMode(35, INPUT);

Serial.begin(9600);

}

void loop()

{

int sensorvalue = analogRead(35); if(sensorvalue>1000)

{

Serial.print("Sensor value is : ");

Serial.println(sensorvalue); 
delay(2000);

}

}

Output:

ESP32-OLED

ESP32-OLED

Aim:

This experiment shows how to display the message on OLED using ESP32-Microcontroller.

Description:

To display message on OLED screen. 

Hardware required:

ESP32-Microcontroller Development board

Pin connection:

Pin Mapping:

OLED	ESP32
5V	5V
SCL	IO22
SDA	IO21

Procedure:

1.        The above pin connection shows how to interface OLED with ESP32 board.

2.        Do the connections as shown in the pin diagram and pin mapping.

3.        Connect the USB cable to the board.

4.        Open Arduino IDE .Select DOIT ESP32 DEVKIT V1in boards and select COM port.

5.        Verify the program and Upload it.

6.    Now you can see the output displaying the message on OLED of ESP32 microcontroller board.

Program:

#include<Wire.h> #include"SSD1306.h"

/* SDA=21,SCL=22 */

SSD1306 display(0x3c,21,22); void setup(void)

{

display.init();

/* display message in OLED */ display.drawString(0,0,"RDL Technologies PVT. LTD."); display.display();

}

void loop(void)

{

}

Output:

ESP32-SD CARD

ESP32-SD CARD

Aim:

To read the stored directories in SD card using ESP 32 microcontroller development board.

Description:

Interfacing SD card module with ESP 32 to list the directories stored in memory card.

Hardware required:

ESP32-Microcontroller Development board

Pin connection:

Pin Mapping:

SDCARD	ESP32
CS	IO5
MOSI	IO23
SCK	IO18
MISO	IO19

Procedure:

1.        The above pin connection shows how to interface SD Card with ESP32 board.

2.        Do the connections as shown in the pin diagram and pin mapping.

3.        Insert the SD Card in the slot given below the board.

4.        Connect the USB cable to the board.

5.        Open Arduino IDE .Select DOIT ESP32 DEVKIT V1in boards and select COM port.

6.        Verify the program and Upload it.

7.        Open the serial monitor to observe the output.

Program :

/*

Listfiles

This example shows how print out the files in a directory on a SD card The circuit:

* SD card attached to SPI bus as follows:

** MOSI - pin 11

** MISO - pin 12

** CLK - pin 13

** CS - pin 4 (for MKRZero SD: SDCARD_SS_PIN)

created  Nov 2010 by David A. Mellis modified 9 Apr 2012 by Tom Igoe modified 2 Feb 2014 by Scott Fitzgerald

This example code is in the public domain.

*/ #include<SPI.h> #include<SD.h>

Fileroot;

void setup(void)

{

/* Open serial communications and wait for port to open: */

Serial.begin(9600);

/* wait for serial port to connect. Needed for native USB port only */ while(!Serial){

}

Serial.print("Initializing SD card...");

if(!SD.begin(4))

{

Serial.println("initialization failed!"); return;

}

Serial.println("initialization done."); root=SD.open("/"); printDirectory(root,0);

Serial.println("done!");

}

/*nothing happens after setup finishes */ void loop(void){

}

void print Directory(Filedir,intnumTabs){ while(true)

{

Fileentry= dir.openNextFile();

/* no more files */ if(!entry)

{

break;

}

for(uint8_ti=0;i<numTabs;i++)

{

Serial.print('\t');

}

Serial.print(entry.name()); if(entry.isDirectory()){ Serial.println("/"); printDirectory(entry,numTabs+1);

}

else

{

Serial.print("\t\t"); Serial.println(entry.size(),DEC);

}

entry.close();

}

}

ESP32-RTC (Real Time Clock)

ESP32-RTC (Real Time Clock)

Aim:

To display Date and Time on the serial monitor using ESP 32 microcontroller development board.

Description:

Interfacing Real Time Clock module with ESP 32 to display date and time on the serial monitor.

Hardware required:

ESP32-Microcontroller Development board

Pin connection:

Pin Mapping:

RTC	ESP32
SDA	I021
SCL	I022

Procedure:

1.        The above pin connection shows how to display date and time using RTC in ESP32 board.

    2.        Do the connections as shown in the pin diagram and pin mapping.

    3.        Connect the USB cable to the board.

    4.        Open Arduino IDE .Select DOIT ESP32 DEVKIT V1in boards and select COM port.

    5.        Verify the program and Upload it.

    6.        Open the serial monitor to observe the output.

Program:

/* Date and time functions using a DS1307 RTC connected via I2C and Wire lib */ #include<Wire.h>

#include"RTClib.h"    RTC_DS1307RTC;

charrec;

void setup(void)

{

Serial.begin(9600); 

Wire.begin();

RTC.begi n(); 

delay(1000);

//while(!Serial.available());

//{

// rec=Serial.read();

// if(rec=='2')

/* This line sets the RTC with an explicit date & time, for example to set January 16, 2019 at 12.32pm you would call: rtc.adjust(DateTime(2019, 1, 16, 12, 32, 45)) */

RTC.adjust(DateTime("Mar 22 2019","10:32:45"));

//}

}

void loop(void)

{

/*Getting the current Time and storing it into a DateTime object */ DateTimenow=RTC.now();

Serial.print(now.year(),DEC); 

Serial.print('/'); Serial.print(now.month(),DEC); 

Serial.print('/'); Serial.print(now.day(),DEC); Serial.print(' ');

Serial.print(now.hour(),DEC); 

Serial.print(':'); Serial.print(now.minute(),DEC); 

Serial.print(':'); Serial.print(now.second(),DEC); 

Serial.println();

delay(1000);

}

ESP32-CONTROLLING LED BRIGHTNESS

ESP32-CONTROLLING LED BRIGHTNESS

Aim:

To vary the intensity of LED using potentiometer.

Description:

This experiment shows how to read an analog input value connected to onboard pot and display it on the serial monitor of the Arduino Software (IDE).

Hardware required:

ESP32-Microcontroller development board

Pin connection:

Pin Mapping:

Development Board	ESP32
Potentiometer	I034
LED	I05

Procedure:

1.        The above pin connection shows how to control the brightness of LED using potentiometer in ESP32 board.

2.        Do the connections as shown in the pin diagram and pin mapping.

3.        Connect the USB cable to the board.

4.        Open Arduino IDE .Select DOIT ESP32 DEVKIT V1in boards and select COM port.

5.        Verify the program and Upload it.

6.        Open the serial monitor to observe the values.

7.        Now using a screw driver rotate the potentiometer. The LED will be very bright at the highest point and low as you turn the potentiometer in the opposite direction.

Program:

void setup(void)

{

/* set baud rate */

Serial.begin(9600);

/* Initialize the input pin */ pinMode(34,INPUT);

/* Initialize the output pin */ pinMode(5,OUTPUT);

}

/* the loop function runs over and over again forever */ 
void loop(void)

{

int outputvalue=analogRead(34);

int value=map(outputvalue,0,1023,0,255); 
analogWrite(5,outputvalue);

/* Print a value on the serial monitor */ Serial.println(outputvalue); delay(1000);

}