PIC Mini Project Board with PicKit2 USB Programmer ICD ICSP

Quick Overview :
PICs are popular with both industrial developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes, availability of low cost or free development tools, and serial programming (and re-programming with flash memory) capability. They are also commonly used in educational programming .

PIC mini Project Board(RED) Features:

• PIC Development Board for Microchip PIC Series.
• Quartz crystall 20Mhz.
• External TX,RX, GND
• On board programming ISP.
• Power indicator LED.
• Reset Switch for the IC.
• Colour :RED

PicKit2 USB Programmer ICD ICSP Features:

• Supported Device Families:
•               PIC10F
•               PIC12F
•               PIC16F
•               PIC18F
•               PIC24
•               dsPIC30, dsPIC33
• Programs all current 8-, 16-, and 32-bit Flash PIC microcontrollers.
• Includes the UART Tool and Logic Tool microcontroller  development utilities.
• With a portable USB power source, PICkit 2 will program the downloaded code into a PIC Microcontroller

For More Sample Codes , Schematics & Tutorials : CLICK HERE

GSM/GPRS Shield with GPS Receiver PA6E-CAM

Quick Overview :

This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900A.

The Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.

GPS module from GlobalTop: PA6E-CAM, based on MediaTek MT3333 chipset. Possibility of using both systems improves position accuracy and shortens cold start time, especially in difficult satellite signal conditions.

Module is pin-to-pin and functionally compatible to older PA6E module based on MT3329 chipset. Thus it is possible simple migration to this module without changing of printed boards.

GSM/GPRS Shield Features:

• Dual-Band GSM/GPRS 900/ 1800 MHz
• TTL data(RX,TX,GND).
• ESD Compliance.
• Enable with MIC and SPeaker socket.
• SMA connector with GSM Antenna 
• SIM Card holder.
• Configurable baud rate
• Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.

GPS Receiver PA6E-CAM Features:

• 33 tracking/ 99 acquisition-channel GPS receiver.
• Supports QZSS, SBAS(WAAS, EGNOS, MSAS, GAGAN*) ranging.
• Ultra-High Sensitivity: -165dBm.
• High Update Rate: up to 10Hz(: SBAS can only be enabled when update rate is equal or less than to 5Hz.).
• 12 multi-tone active interference canceller(Some features need special firmware or command programmed by customer please refer to “PMTK Command List”)
• High accuracy 1-PPS timing support for Timing Applications (±10ns RMS jitter).
• AGPS Support for Fast TTFF.

GSM/GPRS Shield Applications:

• Industrial automation.
• GPRS based data logging.
• GPRS and GPS application.
• Home automation.
• Health monitoring. 
• Agriculture automation.
• Vehicle tracking.
• Remote monitoring and controlling.
• GPRS based Weather report logging. 
• GSM GPRS based Security alert. 
• GPRS based remote terminal for file transfer.
• IVRS.
• Bulksms sending.

GPS Receiver PA6E-CAM Applications:

• Handheld Device 
• PLB 
• M2M application 
• Asset management 
• Surveillance

For More Sample codes , Schematics  & Tutorials : CLICK HERE

FT245 Breakout Board

QUICK OVERVIEW:
The FT245 USB Breakout  Board  is an accessory board that provides a USB to parallel FIFO interface, with FT245 chip onboard.

Features:

• FT245RL IC.
• USB B type connector.
• FIFO interface
• Control interface (8 data pins & 6 control pins).
• Ideal for establishing communication between MCU and PC.

FOR SAMPLE CODES, SCHEMATICS CLICK HERE

4 Channel Relay Board 12V-Compatible for Arduino

QUICK OVERVIEW:
The Relay shield is capable of controlling 4 relays. The max switching power could be 10A/120VAC or 10A/24VDC. It could be directly controlled by Arduino through digital IOs.Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC 7Amps mains like lights, fans, motors etc.

I/O Connection:

Features:

• 4 channel Relay.
• Arduino compatible.

4 SPDT Relay channels 

.

Power supply:12VDC 1AMP

Current consumption: 400 mA.

LED indication for relay & power supply.

Design based on highly proven IC ULN2003 as driver. 

FOR SAMPLE CODES , SCHEMATICS CLICK HERE

RDL UNO-PI

QUICK OVERVIEW:
It's quite common practice for an hobbyist/Electronic enthusiasts building an application on Raspberry Pi and Arduino stacked together. RDL UNO PI which reduces the circuit complexity between Raspberry and Arduino , RPI and Arduino shields can be stacked easily onto UNO-PI headers.

One can easily handle PWM and Analog inputs by stack on RDL ATmega328 board programmed with Arduino IDE. Connectivity made easier by selectable jumper settings, enables the connection switching between RPI(GPIO pins),UNO(D0-D7) and External data(IO0-IO7) with Bi-Directional voltage level converter(3.3v-5v).On board DC-DC option provides stable current  up to 2.5A and 3.3v-5v for the required circuit.

1.External Analog pins(ADC).*

2.DC input 12v.

3.Power supply DC 12v.

4.DC-DC 12v-5v 2.5A.

5.UNO Header.

6.Serial communication port selection(jumper setting) .

7.External I2C.

8.8 bit Port selection (Raspberry Pi /Arduino/External data bus).

9.UNO Headers.

10.8bit Status LEDS.

11.8bit External I/O’s.

12.External SPI.

13.External Serial RX ,TX,GND.

* Works only with RDL UNO ATMEGA328  Stack on shields.

FRONT HEADERS (RDL-UNO ATMega328)AND PINS

BACK HEADER(RASPBERRY PI B/B+.)

FOR SAMPLE CODES , SCHEMATICS  CLICK HERE

RFID Reader - Serial

Quick Overview:
This is a low frequency (125Khz) RFID Reader With serial Output with range upto 15cms. The RFID Reader  is designed specifically for low-frequency (125 kHz) passive tags.Frequency refers to the size of the radio waves used to communicate between the RFID system components.

Applicatons:

• Rfid based attendance system
• Rfid based smart shopping system 
• Rfid based medical file tracking system 
• Rfid based inventory management system
• Rfid based access control system -security 
• Rfid based library management system 
• Rfid based security guard monitoring system
• Rfid based asset tracking system ,
• Rfid based vehicle parking system
• Rfid based toll gate collection system
• Rfid hotel room access control system .
• Rfid based product identification for blind
• Rfid based blind indoor navigation system.
• Rfid based dual authentication system for software application ,
• Rfid based industry supply chain control system
• Rfid based smart conveyor

Features:

• Low-cost method for reading passive RFID tags.
• Built in Antenna
• On-Board Power LED
• Current Requirement <120mA
• Communication RS232 Serial at 9600 baud.
• Detecting Range upto 15cms.

For More Sample Codes , Schematics & Tutorials CLICK HERE

Mini ARM Board-LPC2148 Breadboard Compatible

Quick Overview:

LPC2148 is a single-chip 32-bit RISC Microcontroller with 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 32KB RAM having Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, one with full modem interface. Two I2C serial interfaces, Two SPI serial interfaces Two 32-bit timers, Watchdog Timer, PWM unit, Real Time Clock with optional battery backup, Brown out detect circuit General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.

Features:

• Includes NXP LPC 2129 Microcontroller.
• On Board Power LED Indicator.
• On Board 12 MHz Crystal Oscillator. 
• On Board 3.3V Regulator.
• On Board 1.8V Regulator.
• All Port Pins available at Berge Strip.
• Includes FT232 Breakout Board.

For Sample codes , schematics & Tutorials CLICK HERE