Hall Effect Current Sensor 30A

Overview

ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switchmode power supplies, andovercurrent fault protection. The device is not intended for automotive applications.

Hall Effect Current Sensor 30A:

Features:

• ACS712ELC-30A sensor chipset
• Powered by 5V power supply
• On-board power indicator
• Measures -30~+30A current, corresponding simulation output 100mV/A 
• No test current through the output voltage is VCC / 2

For Codes & Description please Click Here

DC-DC Adjustable Step-up Power Converter Module LM2577 4-35V

Overview

It is a LM2577 DC 3-30V to 4-35V Adjustable Power Supply Step-up Module, maximum input current 3A, the highest conversion efficiency 92%, It very suitable for DIY a mobile power, Boost charger.

DC-DC Adjustable Step-up Power Converter Module LM2577 4-35V

Features:

• Wide Input voltage: 3.5V-35V
• Output Voltage: 4-35V (Adjustable)
• Output current: rated current 3A MAX ( Heat-sink Needed)
• If you need its output power greater than 15W, please add with heat-sink
• Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
• Switching Frequency: 50KHz
• Rectifier: Non-Synchronous Rectification
• Short circuit protection: current limiting, since the recovery
• Operating temperature: Industrial grade (-40 to +85) (output power 10W or less)
• Full load temperature rise: 40
• Load regulation: ± 0.5%
• Voltage regulation: ± 0.5%

For more details of Code & Description Click Here

Serial RAM 8K

Overview

The Serial RAM Board features an 8192-byte Serial SRAM 23K640  designed to communicate via the microcontroller's SPI interface. Perfectly fits into all standard prototyping breadboards.

Serial RAM 8K

Features:

• 23K640 serial RAM with 64K bits of memory.
• Perfectly fits into all standard prototyping breadboards.
• Industry standard SPI communication interface with fast datarates.
• Board is designed to use 3.3V power supply only.

For more Details & Codes Click Here

SOIC to DIP Adapter 20-Pin

Overview

Adapter for standard 20 SOIC SMD Parts to convert to standard 20 Pin DIP size.This SOIC breakout board is a PCB which will interface an SOIC package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.Simply solder-on your 20-pin SOIC form-factor IC, along with some 0.1-inch-pitch headers, and you will have a usable, breadboard-friendly unit. 

SOIC to DIP Adapter 20-Pin:

Features

• Solid Construction
• Plated Through Holes
• Sutable for Mounting in Standard 20 Pin DIP Configuration.

For More Details & Coding please Click Here