Serial Flash 8MB

Overview

The SerialFlash Board features an 8 Mbit, low-voltage Serial Flash Memory 25P80V6 with 40 MHz SPI bus interface. It perfectly fits into all standard prototyping breadboards. Serial-interface memory can be used in numerous electronic devices and applications.

Serial Flash 8MB:

Features:

• 25P80V6 with 8Mbit of memory and 40 MHz SPI bus interface.
• Industry standard SPI communication interface with fast datarates.
• Board is designed to use 3.3V power supply only.
• SerialFlash Board is ideal for applications such as multimedia devices, drives, optical and printing devices.

For More Descrioption & Codes Please Click Here

4 Channel Opto-Isolated Board

Overview

4 Channel Opto-Isolated Board is a 4 channel opto-isolator board assembly that allows microcontroller and other logic circuits to be interfaced to both input and output signals that require opto-isolation.This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. this board to allow a microcontroller control servos or other motors that use a higher voltage than the TTL logic on the (3.3V or 5V) micro, and may cause electromagnetic interferance with our system as the motors turn on and off. This board will isolate the systems, creating a type of electrical noise barrier between devices.

4 Channel Opto-Isolated Board

Features:

• 4 bit OPTO Isolated input using MCT-2E IC.
• OPTO outputs indication are provided by 5mm LED.
• OPTO inputs are provided through 5 pin Connector.
• OPTO outputs are provided through 6 pin Connector.
• The opto isolated board comes with a 1K resistor for opto input current.

For More Description and Codes Click Here

4 Relay Interfacing Board 5V Isolated Raspberry Pi and Arduino Compatible

Overview

The board has four relays driven by ULN2803 IC and MCT2E IC for isolation purpose. The board works on 5V but the input signal can come directly from Raspberry Pi and Arduino output working 5V to control relays. Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by individual LEDs.

4 Relay Interfacing Board 5V Isolated Raspberry Pi and Arduino Compatible

Features

• Complete Output Isolation.
• LED indication for relay & power supply. 
• Design based on highly proven IC ULN2803 as driver 
• Direct input 5V Raspberry Pi and Arduino for relay control
• AC or DC Operating Voltages.
• No Leakage Current.
• Eliminates costly isolation relays and wiring.

For COdes & Documentation Please Click here